Science Score: 67.0%
This score indicates how likely this project is to be science-related based on various indicators:
-
○CITATION.cff file
-
✓codemeta.json file
Found codemeta.json file -
✓.zenodo.json file
Found .zenodo.json file -
✓DOI references
Found 3 DOI reference(s) in README -
✓Academic publication links
Links to: zenodo.org -
✓Committers with academic emails
2 of 4 committers (50.0%) from academic institutions -
✓Institutional organization owner
Organization ncar has institutional domain (ncar.ucar.edu) -
○JOSS paper metadata
-
○Scientific vocabulary similarity
Low similarity (4.1%) to scientific vocabulary
Repository
STL Files for openiotwx project
Basic Info
- Host: GitHub
- Owner: NCAR
- License: gpl-3.0
- Default Branch: main
- Size: 28.8 MB
Statistics
- Stars: 1
- Watchers: 2
- Forks: 0
- Open Issues: 0
- Releases: 1
Metadata Files
README.md
openIoTwx STL File Repository
Base Configuration
The base configuration can capture the following:
- temperature / pressure / humidity
- PM2.5
The configuration consists of:
- a 3.8" 3 opening wxOrb (non-imprint)
- a basic shield housing
- a basic AQ housing (2 part hooded)
- 1 PVC adapter
- 4 PVC rings
- 2 closed endcaps
- 1 vented endcap
Print time is estimated at 37.5h on Ender 3 S3 at 60mm/s, PLA+.
| Part | Location | Est. Print Time | Notes |
|:---:| :---: | :--: | :-- |
| 3.8" Housing (3 opening) | ./housing/orb38housing3open.stl | 12h | 20-25% infill; positioned thread side down |
| basic shield housing ( for BME680) | housing (MF) ./shield/mushroomshieldMF.stl | 6h | print cup side up / (M) thread down; use limited support to end of thread for stability; 25% infill |
|a basic AQ housing (2 part hooded) | base (M) ./aq/aqgrillbase_M.stl;
vented lid ./aq/aqgrilllid.stl | base: 4h; lid: 2h | base: print on side with tree support (@2% infill), 20-25% infill everywhere else; lid: print grill side down, 20-25% infill |
| PVC adapter | ./pvcadapter/knurledpvcadapter_M.stl | 3h | print thread side up, 30-40% infill for maximum strength |
| PVC Rings (4x) | ./solarpanel/solarpanelringclamp_11mm.stl | 6h | print flat side to plate, 30-40% infill for maximum strength |
| Closed endcaps (2x) | ./endcaps/closed_endcap.stl | 3h | flat (cap) side to plate, 30-40% infill for maximum strength |
| Vented endcap (1x) | ./endcaps/vented_endcap.stl | 1.5h | flat (vented) side to plate, 30-40% infill for maximum strength |
Project Links
- openIoTwx Hub : https://github.com/NCAR/openiotwx-hub
Owner
- Name: NSF National Center for Atmospheric Research
- Login: NCAR
- Kind: organization
- Location: Boulder, CO
- Website: http://ncar.ucar.edu
- Repositories: 934
- Profile: https://github.com/NCAR
NSF NCAR is sponsored by the U.S. National Science Foundation and managed by the University Corporation for Atmospheric Research.
GitHub Events
Total
Last Year
Committers
Last synced: about 2 years ago
Top Committers
| Name | Commits | |
|---|---|---|
| kmaull-ucar | k****r | 4 |
| agbeli-ncar | a****i@u****u | 3 |
| Agbeli Ameko | 6****r | 1 |
| KM | k****l@u****u | 1 |
Committer Domains (Top 20 + Academic)
Issues and Pull Requests
Last synced: about 1 year ago
All Time
- Total issues: 0
- Total pull requests: 0
- Average time to close issues: N/A
- Average time to close pull requests: N/A
- Total issue authors: 0
- Total pull request authors: 0
- Average comments per issue: 0
- Average comments per pull request: 0
- Merged pull requests: 0
- Bot issues: 0
- Bot pull requests: 0
Past Year
- Issues: 0
- Pull requests: 0
- Average time to close issues: N/A
- Average time to close pull requests: N/A
- Issue authors: 0
- Pull request authors: 0
- Average comments per issue: 0
- Average comments per pull request: 0
- Merged pull requests: 0
- Bot issues: 0
- Bot pull requests: 0