Releases | Open Source Science

What's Changed

hot fix for failedjobsdir by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/506

Full Changelog: https://github.com/cta-observatory/lstmcpipe/compare/v0.11.2...v0.11.3

- Python
Published by vuillaut over 1 year ago

lstmcpipe - v0.11.2

lstmcpipe v0.11.2 introduces bug fixes in the r0 to dl1 processing

What's Changed

fix issue that did not allow doing only the split stage without dl1 processing by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/499
fix nsb tuning rate parameter name by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/501
nsb parameter name depends on lstchain version by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/503
fix issue that did not move the failed outputs in r0 to dl1 processing by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/504

Full Changelog: https://github.com/cta-observatory/lstmcpipe/compare/v0.11.1...v0.11.2

- Python
Published by vuillaut over 1 year ago

lstmcpipe - v0.11.1

v0.11.1 includes fixes for the NSB-grid prod

Full Changelog: https://github.com/cta-observatory/lstmcpipe/compare/v0.11.0...v0.11.1

What's Changed

add diffuse split configs to documentation by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/492
fix test DL2 and IRF paths by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/495
Fix dl2 paths bis by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/496
include lstchain version in prod-id for nsb tuned prods by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/497
v0.11.1 by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/498

Full Changelog: https://github.com/cta-observatory/lstmcpipe/compare/v0.11.0...v0.11.1

- Python
Published by vuillaut over 1 year ago

lstmcpipe - v0.11.0

v0.11.0 introduces a new config to split the gamma diffuse into train and test datasets.

What's Changed

my20240828branch by @abhishekabhi063 in https://github.com/cta-observatory/lstmcpipe/pull/482
reworked config to start from DL1 and add slurm options to better man… by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/484
modify rerun_cmd to make sure the job crashes if the cmd fails and raises and Error by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/485
split gamma diffuse in train/test with new child configs by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/483

New Contributors

@abhishekabhi063 made their first contribution in https://github.com/cta-observatory/lstmcpipe/pull/482

Full Changelog: https://github.com/cta-observatory/lstmcpipe/compare/v0.10.5...v0.11.0

- Python
Published by vuillaut over 1 year ago

lstmcpipe - v0.10.5

v0.10.5 introduces the changes for the nsb-grid production.

What's Changed

20240122v0.10.4prod5_trans80 by @leolemoign in https://github.com/cta-observatory/lstmcpipe/pull/454
20240219allskyv0.10.7alldecsrcdepbase production by @SeiyaNozaki in https://github.com/cta-observatory/lstmcpipe/pull/455
add --sourceprodid as arg to generate config by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/459
Production for high NSB conditions and the 3476 dec line by @moralejo in https://github.com/cta-observatory/lstmcpipe/pull/457
Fix prod 20240122v0.10.4prod5trans80 config by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/460
Fix prod ID for prod 20240122v0.10.4prod5trans80 by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/461
clean the complete lstmcpipe config by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/462
Update versions of actions by @morcuended in https://github.com/cta-observatory/lstmcpipe/pull/464
add new production for src3 with tuned NSB for moon data analysis by @joteros in https://github.com/cta-observatory/lstmcpipe/pull/463
Bump tj-actions/changed-files from 39 to 41 in /.github/workflows by @dependabot in https://github.com/cta-observatory/lstmcpipe/pull/439
add 20240430v0.10.4src9dec3476tuned by @jMendezGallego in https://github.com/cta-observatory/lstmcpipe/pull/465
Add jobids to slurm error and output files by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/467
20240529 v0.10.11 src4 dense mc line by @FrancaCassol in https://github.com/cta-observatory/lstmcpipe/pull/466
Update environment.yml to remove constraints on versions by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/469
add configs for prod 20240716v0.10.7src10dec3476tuned by @ToraTherese in https://github.com/cta-observatory/lstmcpipe/pull/470
add productionconfigs/20240727v0.10.11src12tuned by @hidekatagiri in https://github.com/cta-observatory/lstmcpipe/pull/474
update url test data by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/478
fix generatetestlapalma script by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/475
script to generate different nsb levels configs by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/472
fix dumping lstchain tuned configs in dedicated script by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/479
add efficiency cuts to dl2 to irfs options by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/477
add config for v0.10.11 src14 dec2276 by @rlopezcoto in https://github.com/cta-observatory/lstmcpipe/pull/480

New Contributors

@morcuended made their first contribution in https://github.com/cta-observatory/lstmcpipe/pull/464
@dependabot made their first contribution in https://github.com/cta-observatory/lstmcpipe/pull/439
### Requested productions:
@leolemoign - https://github.com/cta-observatory/lstmcpipe/pull/454
@moralejo - https://github.com/cta-observatory/lstmcpipe/pull/457
@joteros - https://github.com/cta-observatory/lstmcpipe/pull/463
@jMendezGallego - https://github.com/cta-observatory/lstmcpipe/pull/465
@ToraTherese - https://github.com/cta-observatory/lstmcpipe/pull/470
@hidekatagiri - https://github.com/cta-observatory/lstmcpipe/pull/474
@rlopezcoto - https://github.com/cta-observatory/lstmcpipe/pull/480

Full Changelog: https://github.com/cta-observatory/lstmcpipe/compare/v0.10.4...v0.10.5

- Python
Published by vuillaut over 1 year ago

The main change is the introduction of a new PathConfig to train and apply a new model starting from existing DL1b merged files. This allows testing other models hyperparameters and src-dependent analysis starting from existing DL1 files.

What's Changed

Update README.rst with conda install by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/421
20230921 v0.10.4 src3 dec3476 4822 tuned from Seiya by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/423
fix path in prod 20230921 by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/424
reproduce prod 20230921v0.10.4src3dec34764822_tuned with missing dl1 to dl2 by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/425
Update prod request instructions in readme by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/428
add productionconfigs/20230927v0.10.4crabtuned/ by @katagirihide in https://github.com/cta-observatory/lstmcpipe/pull/427
setuptools_scm<8 by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/430
use private data to validate lstchain config if possible, solving EFFECTIVEFOCALLENGTH issue by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/431
remove 20230921 production folder by @SeiyaNozaki in https://github.com/cta-observatory/lstmcpipe/pull/433
20231024 v0.10.4 base dec min 2924 min 1802 6166 by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/434
Update version of tj-actions/changed-files in CI action by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/436
Voutsi seasonal atmosphere by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/435
prod 20231106v0.9.12basedl1dec931min-2924min-18026166 by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/437
improved documentation by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/440
exhaustive user documentation by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/441
production 20240131allskyv0.10.5alldec_base by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/443
prod 20240235v0.10.5dec931decmin2924dec3476 by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/444
add contributing by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/446
add configs for prod 20240206v0.10.5lstschooldummy_prod by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/448
ask 20240126v0.10.4src6dec2276tuned production by @alvmas in https://github.com/cta-observatory/lstmcpipe/pull/447
config for prod 20240131allskyv0.10.5alldec_base to fix failed dl… by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/450
bump base config to lstchain v0.10.7 by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/452
path config for a train-test analysis from existing prod by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/451
prepare v0.10.4 by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/453

New Contributors

@katagirihide made their first contribution in https://github.com/cta-observatory/lstmcpipe/pull/427

Full Changelog: https://github.com/cta-observatory/lstmcpipe/compare/v0.10.3...v0.10.4

- Python
Published by vuillaut about 2 years ago

lstmcpipe - v0.10.3

Fixing pypi release

What's Changed

fixing pypi release by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/418
v0.10.3 by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/419
use pypi token correctly by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/420

Full Changelog: https://github.com/cta-observatory/lstmcpipe/compare/v0.10.2...v0.10.3

- Python
Published by vuillaut over 2 years ago

lstmcpipe - v0.10.2

lstmcpipe v0.10.2 The main changes concern the compatibility with lstchain > v0.10 and pure conda installation to make a conda package. Note that this version is still compatible with lstchain v0.9.x

What's Changed

new prod 20230414v0.9.13dec931aztel to fix dec931 issue by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/400
pypi github workflow by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/401
improve doc about dl1ab by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/402
prod 20230315srcdec2276tunednsb by @gabriele-panebianco-inaf in https://github.com/cta-observatory/lstmcpipe/pull/397
20230428 src dec2276 tuned nsb az tel by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/403
20230517 v0.9.13 large offset by @mdebony in https://github.com/cta-observatory/lstmcpipe/pull/404
20230517 v0.9.13 large offset crab tuned by @mdebony in https://github.com/cta-observatory/lstmcpipe/pull/405
20230529 v0.9.13 src4 full line by @FrancaCassol in https://github.com/cta-observatory/lstmcpipe/pull/406
20230601 v0.9.13 dec 4822 dec 6166 by @aaguasca in https://github.com/cta-observatory/lstmcpipe/pull/407
Fix memory in prod 20230529v0.9.13src4fullline by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/410
Bug: fix workflow_step label in log files when dl1ab step is used by @aaguasca in https://github.com/cta-observatory/lstmcpipe/pull/409
20230601 v0.9.13 src7 darkNSB by @aaguasca in https://github.com/cta-observatory/lstmcpipe/pull/408
soften requirements on python and pyirf in conda env by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/411
Add new production src5 with lstchain v0.10 by @alvmas in https://github.com/cta-observatory/lstmcpipe/pull/412
Test Python versions from 3.7 to 3.11 by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/413
Add configs for new allsky production using lstchain 0.10.4 by @LukasNickel in https://github.com/cta-observatory/lstmcpipe/pull/415
install lstchain from conda by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/416
v0.10.2 by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/417

New Contributors

@gabriele-panebianco-inaf made their first contribution in https://github.com/cta-observatory/lstmcpipe/pull/397
@mdebony made their first contribution in https://github.com/cta-observatory/lstmcpipe/pull/404

Full Changelog: https://github.com/cta-observatory/lstmcpipe/compare/v0.10.1...v0.10.2

- Python
Published by vuillaut over 2 years ago

lstmcpipe - v0.10.1

lstmcpipe v0.10.1

Fix a bug that was preventing the correct dependencies to be set.

What's Changed

use conda env lstchain-v0.9.11 as new default by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/386
fix tree in test prod setup by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/387
Add full production with standard NSB/PSF for AGN analysis by @mireianievas in https://github.com/cta-observatory/lstmcpipe/pull/388
Produce RF with release v0.9.6 to verify new DL1 compatibility by @FrancaCassol in https://github.com/cta-observatory/lstmcpipe/pull/381
example notebook in the doc by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/391
20230124 src6 dec2276 tuned by @alvmas in https://github.com/cta-observatory/lstmcpipe/pull/390
Fix doc by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/392
Add full production with standard NSB/PSF for AGN analysis (az instead of sin_az in features) by @mireianievas in https://github.com/cta-observatory/lstmcpipe/pull/389
renamed prod 20230127v0.9.12baseprodaz_tel and rerun config generation by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/393
New production for src4 with denser node spacing by @FrancaCassol in https://github.com/cta-observatory/lstmcpipe/pull/395
Fixing memory issue in prod by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/396
make sure that all jobs check the exit code before continuing by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/398
the dependencies afterok should be given with : by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/399

New Contributors

@mireianievas made their first contribution in https://github.com/cta-observatory/lstmcpipe/pull/388

Full Changelog: https://github.com/cta-observatory/lstmcpipe/compare/v0.10.0...v0.10.1

- Python
Published by vuillaut almost 3 years ago

lstmcpipe - v0.10.0

What's Changed

Adds a couple of safeguards for analysers when requesting a new prod, both in the CI and in the PR templates.
Path modification for AllSky prod moved to LSTProd2 directory.

20221021 crab full lstchain097 by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/352
fix 20221021 crab full lstchain097 by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/354
Request new production for src4 by @FrancaCassol in https://github.com/cta-observatory/lstmcpipe/pull/356
fix doc dl1ab command example by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/359
20221027 v0.9.9 crab tuned by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/357
Update lstchain config and version to v0.9.7 by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/355
fix lstchain read config validation by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/362
fix env protozfits by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/363
20221027 v0.9.9 base prod by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/361
AllSky prod pipeline DL1ab schema by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/365
Pipeline doc by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/366
Fix 20221025 src4 high nsb lza by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/364
adding psf tuning False to config by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/368
Run prod. 20221108galsourcemin413tuned_nsb by @aaguasca in https://github.com/cta-observatory/lstmcpipe/pull/370
20221104 src3 dec3476 4822 tuned by @SeiyaNozaki in https://github.com/cta-observatory/lstmcpipe/pull/367
Update pipelines documentation by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/372
Update pre-commit config by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/373
change allsky prod path from georgios home to aswg by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/374
New production config 20221128src5dec3476_tuned by @alvmas in https://github.com/cta-observatory/lstmcpipe/pull/375
fix lstchain config prod 20221128 by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/376
Update citation section in readme by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/377
fix lstchain config for prod 20221025src4highNSBLZA by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/380
Update pull request template with self-checks by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/382
validate lstchain config for mc requirements on image extractor by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/383
fix issue with moved prod Path by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/385

New Contributors

@FrancaCassol made their first contribution in https://github.com/cta-observatory/lstmcpipe/pull/356
@aaguasca made their first contribution in https://github.com/cta-observatory/lstmcpipe/pull/370
@alvmas made their first contribution in https://github.com/cta-observatory/lstmcpipe/pull/375

Full Changelog: https://github.com/cta-observatory/lstmcpipe/compare/v0.9.0...v0.10.0

- Python
Published by vuillaut about 3 years ago

lstmcpipe - v0.9.0

lstmcpipe v0.9 The main change for the user concerns how the slurm options are handled (with dictionnaries rather than strings) in the lstmcpipe config. Note that this is an API break and older configs can't be used anymore.

What's Changed

Update .pre-commit file with new flake8 repo by @garciagenrique in https://github.com/cta-observatory/lstmcpipe/pull/337
add 20220905src4high_NSB prod files by @garciagenrique in https://github.com/cta-observatory/lstmcpipe/pull/338
making sure CI runs only on yaml files by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/339
Update CI.yml by @garciagenrique in https://github.com/cta-observatory/lstmcpipe/pull/340
Fix CI by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/341
20220902 crab test nodes by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/336
default options before all other options by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/342
20220913 crab theta23 tuned by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/343
20220913 crab test nodes tuned by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/344
20221006 src3 test nodes by @SeiyaNozaki in https://github.com/cta-observatory/lstmcpipe/pull/345
Fix 20221006 by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/350
Smarter prod dl1ab checker by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/347
dependency for dl1_dl2 is either merge or train pipe by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/349
20220913 crab theta23 tuned by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/346

Full Changelog: https://github.com/cta-observatory/lstmcpipe/compare/v0.8.6...v0.9.0

- Python
Published by vuillaut over 3 years ago

lstmcpipe - v0.8.6

lstmcpipe v0.8.6

What's Changed

20220531 dec3476 std by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/321
Prod config 20220601 dec3476 tuned by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/322
fix CI validate configs by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/323
refactor pointings by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/324
New test diffuse 4822 by @giorgio-pirola in https://github.com/cta-observatory/lstmcpipe/pull/328
rename config 20220524 to 20220624 by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/329
Fix 20220624 dec 4822 tuned test diffuse gammas by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/330
24052022 replaced with 20220624 by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/332
Fix the way to get keys and passed options for dl2toirfs stage by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/331
Refactor all sbatch commands in stages by @garciagenrique in https://github.com/cta-observatory/lstmcpipe/pull/264
improve IRFs summary plot by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/335

Full Changelog: https://github.com/cta-observatory/lstmcpipe/compare/v0.8.5...v0.8.6

- Python
Published by vuillaut over 3 years ago

lstmcpipe - v0.8.5

What's Changed

using deepdiff to display the updated lstchain config by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/320

Full Changelog: https://github.com/cta-observatory/lstmcpipe/compare/v0.8.4...v0.8.5

- Python
Published by vuillaut over 3 years ago

lstmcpipe - v0.8.4

lstMCpipe v0.8.4

Bug fix to generate config

What's Changed

fix dump lstchain config by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/318
v0.8.4 codemeta by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/319

Full Changelog: https://github.com/cta-observatory/lstmcpipe/compare/v0.8.3...v0.8.4

- Python
Published by vuillaut over 3 years ago

lstmcpipe - v0.8.3

lstMCpipe v0.8.3

A couple of config adjustments to smoothen the AllSky prod

What's Changed

Update install instructions by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/289
Improve lstchain config dumping by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/281
20220523 allsky std by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/296
simplify prod dates in doc table by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/297
Add configuration for source dec 413 and tuned nsb by @misabelber in https://github.com/cta-observatory/lstmcpipe/pull/292
New production config (src3dec34764822tunednsb) by @SeiyaNozaki in https://github.com/cta-observatory/lstmcpipe/pull/295
add readmes to the prod table by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/299
allowing yaml extension in config doc by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/300
test valid config by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/301
Raise memory requirement to 60GB by default by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/305
Correct lstchain config file problems for min413 production with nsb tuning by @misabelber in https://github.com/cta-observatory/lstmcpipe/pull/308
running lstchain r0_dl1 and dl1ab to validate passed config by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/303
fix error with protobuf by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/311
Request 4GB memory for IRF production by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/312
Request 6GB for IRFs by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/314
testing diffuse gamma DL1 production by @jurysek in https://github.com/cta-observatory/lstmcpipe/pull/310
Running from dl0 to IRFs for dec_4822 by @giorgio-pirola in https://github.com/cta-observatory/lstmcpipe/pull/306
fix CI valid yaml by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/315
Update codemeta.json by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/317

New Contributors

@SeiyaNozaki made their first contribution in https://github.com/cta-observatory/lstmcpipe/pull/295
@giorgio-pirola made their first contribution in https://github.com/cta-observatory/lstmcpipe/pull/306

Full Changelog: https://github.com/cta-observatory/lstmcpipe/compare/v0.8.2...v0.8.3

- Python
Published by vuillaut over 3 years ago

lstmcpipe - v0.8.2

lstMCpipe v0.8.2

Main change: Fixes an issue with config generation using the command line tool

What's Changed

Prod 20220511 allsky std by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/282
fix sorting production list by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/283
Use core scripts outside the job array by @LukasNickel in https://github.com/cta-observatory/lstmcpipe/pull/204
20220518 allsky dec2276 tuned by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/280
fix DL1ab config generation by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/285
fix issue with plot_pointings projections by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/287
release v0.8.2 by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/288

Full Changelog: https://github.com/cta-observatory/lstmcpipe/compare/v0.8.1...v0.8.2

- Python
Published by vuillaut almost 4 years ago

lstmcpipe - v0.8.1

lstMCpipe v0.8.1

The main change concerns the class PathConfigAllSky and children to deal with DL1ab reprocessing.

What's Changed

avoid processing directories not containing simtel files by @garciagenrique in https://github.com/cta-observatory/lstmcpipe/pull/252
correct arg and include inputdir of `checkgetsimtelinputfiles` PR by @garciagenrique in https://github.com/cta-observatory/lstmcpipe/pull/259
dump modified lstchain config along with lstmcpipe config by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/254
Update Pre-commits by @garciagenrique in https://github.com/cta-observatory/lstmcpipe/pull/262
AllSky config refactoring to separate training and testing and run on all declinations by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/266
Check for exit code of r0todl1 by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/265
Update slurm requirements for AllSky prod by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/270
fix pypi upload for CI by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/268
Add cleaning tmp scripts by @garciagenrique in https://github.com/cta-observatory/lstmcpipe/pull/272
Dl1ab for AllSky by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/271
fix dependency issues by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/269
fix issue with dec_list as kwargs in generate config script by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/275
config for prod 20220518allskydec2276_tuned by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/274
Plot pointings from AllSky productions by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/273
add workflow to convert codemeta to CITATION.cff by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/267
Logging format and messages by @garciagenrique in https://github.com/cta-observatory/lstmcpipe/pull/263
release v0.8 by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/276
Add message how to cite in CITATION.cff by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/277

Full Changelog: https://github.com/cta-observatory/lstmcpipe/compare/v0.7.3...v0.8.1

- Python
Published by vuillaut almost 4 years ago

lstmcpipe - v0.7.3

small bugs and config fixes

What's Changed

Update base config: dpps queue and lstchain v0.9.6 by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/250
add PathConfigAllSkyDL1ab by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/253
remove pypi auto-publication

Full Changelog: https://github.com/cta-observatory/lstmcpipe/compare/v0.7.2...v0.7.3

- Python
Published by vuillaut almost 4 years ago

lstmcpipe - v0.7.2

Fixing pypi installation issues

- Python
Published by vuillaut almost 4 years ago

lstmcpipe - v0.7.1

Very small release to fix pypi upload and version

What's Changed

remove long description from README by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/249

Full Changelog: https://github.com/cta-observatory/lstmcpipe/compare/v0.7...v0.7.1

- Python
Published by vuillaut almost 4 years ago

lstmcpipe - v0.7

lstmcpipe v0.7 introduces a new workflow to deal with complex pipelines. These changes were necessary to deal with the AllSky MC production.

In particular, stages input and output are provided for each stage through the configuration (instead of being fixed by the directory structure at LA Palma as done until now). In order to generate such complex configurations, we introduce a new submodule paths_config with PathConfig classes to deal with the logical structure for each productions.

Working version with: - lstchain v0.9.3 - HiPeRTA v4.2.0 - HiPeRTA uses hdf5-R0 files converted from simtel by using ctapipe_io_mchdf5 v0.3.1-dev

What's Changed

Fix documentation - pipeline graph by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/239
Refactor to separate stages internal logic from production path handling by @garciagenrique in https://github.com/cta-observatory/lstmcpipe/pull/208
fix script generate config by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/240
Prod dates in doc by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/241
add .ipynb_checkpoints/ to gitignore by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/244
Update paths config to handle declinations by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/246
include lstmcpipe version in generated config by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/248
update codemeta for v0.7 by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/247
add slurm options for each stage set by @garciagenrique in https://github.com/cta-observatory/lstmcpipe/pull/242

Full Changelog: https://github.com/cta-observatory/lstmcpipe/compare/v0.6.3...v0.7

- Python
Published by vuillaut almost 4 years ago

lstmcpipe - v0.6.3

What's Changed

fix issue with pypi auto release version by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/235
update version 0.6.2 by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/236
autoversioning from git tags by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/234
v0.6.3 in codemeta by @garciagenrique in https://github.com/cta-observatory/lstmcpipe/pull/233

Full Changelog: https://github.com/cta-observatory/lstmcpipe/compare/v0.6.2...v0.6.3

- Python
Published by vuillaut almost 4 years ago

lstmcpipe - v0.6.2

Added MC prod config for the collaboration

Working version with: - lstchain v0.9.2 - HiPeRTA v4.2.0 - HiPeRTA uses hdf5-R0 files converted from simtel by using ctapipe_io_mchdf5 v0.3.1-dev

What's Changed

Add a new production config for tuned PSF, and for zenith 20 deg, south pointing MC by @chaimain in https://github.com/cta-observatory/lstmcpipe/pull/175
Do no specify slurm account in config (default to the one that the user belongs to) by @garciagenrique in https://github.com/cta-observatory/lstmcpipe/pull/186
change all partitions to long by @garciagenrique in https://github.com/cta-observatory/lstmcpipe/pull/187
Add a new production config for tuned PSF, and for zenith 40 deg, south pointing MC by @chaimain in https://github.com/cta-observatory/lstmcpipe/pull/176
Add new production for 40zd , 180deg pointing and tuned NSB by @misabelber in https://github.com/cta-observatory/lstmcpipe/pull/185
Production cfg for ze40, south pointing, tuned NSB by @jurysek in https://github.com/cta-observatory/lstmcpipe/pull/184
create prod_logs directory outside package. by @garciagenrique in https://github.com/cta-observatory/lstmcpipe/pull/192
Add instruction for sources in prod request by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/193
Documentation page with produced configs by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/194
Former configs added to production_configs by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/195
Validate only added production config by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/200
add pypi publish action by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/228
add doc page with pipelines by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/206

Full Changelog: https://github.com/cta-observatory/lstmcpipe/compare/v0.6.1...v0.6.2

- Python
Published by garciagenrique almost 4 years ago

lstmcpipe - v0.6.1

Introduces template for MC productions user requests. Small bugfixes.

Working version with: - lstchain v0.9.2 - HiPeRTA v4.2.0 - HiPeRTA uses hdf5-R0 files converted from simtel by using ctapipe_io_mchdf5 v0.3.1-dev

What's Changed

Add Sensitivity ratio plot by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/165
replace "dl1" for "dl2" string only in test dataset by @garciagenrique in https://github.com/cta-observatory/lstmcpipe/pull/167
Store true by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/150
Add noise fine tuning by @LukasNickel in https://github.com/cta-observatory/lstmcpipe/pull/168
reorganize dl2tosens script to allow importing by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/163
Add templates for new production configs by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/169
Add MC production instruction in README by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/173
Clean mc prod template by @garciagenrique in https://github.com/cta-observatory/lstmcpipe/pull/178
forgotten changes in last PR updating template by @garciagenrique in https://github.com/cta-observatory/lstmcpipe/pull/181
bump v0.6.1 by @garciagenrique in https://github.com/cta-observatory/lstmcpipe/pull/180
Update codemeta.json by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/182

Full Changelog: https://github.com/cta-observatory/lstmcpipe/compare/v0.6.0...v0.6.1

- Python
Published by garciagenrique almost 4 years ago

lstmcpipe - v0.6.0

Working version with

lstchain v0.9.2
HiPeRTA v4.2.0
- HiPeRTA uses hdf5-R0 files converted from simtel by using ctapipe_io_mchdf5 v0.3.1-dev

What's Changed

Update rtapipe by @garciagenrique in https://github.com/cta-observatory/lstmcpipe/pull/152
add mem requirements to stages by @garciagenrique in https://github.com/cta-observatory/lstmcpipe/pull/153
Dl1ab processing by @LukasNickel in https://github.com/cta-observatory/lstmcpipe/pull/139
pep8, add doc and allow saving fig or not in script compare irfs by @garciagenrique in https://github.com/cta-observatory/lstmcpipe/pull/149
lstmcpipe_envname in environment.yml by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/154
reformat dl1processdl1.py by @garciagenrique in https://github.com/cta-observatory/lstmcpipe/pull/155
improve if else cases with dl1filesper_job by @garciagenrique in https://github.com/cta-observatory/lstmcpipe/pull/159
Slurm config account by @garciagenrique in https://github.com/cta-observatory/lstmcpipe/pull/156
Move to lstchainv091 by @garciagenrique in https://github.com/cta-observatory/lstmcpipe/pull/158
Patching v091 by @garciagenrique in https://github.com/cta-observatory/lstmcpipe/pull/161
Patch dl1ab by @garciagenrique in https://github.com/cta-observatory/lstmcpipe/pull/162
update codemeta.json and version by @garciagenrique in https://github.com/cta-observatory/lstmcpipe/pull/164

Full Changelog: https://github.com/cta-observatory/lstmcpipe/compare/v0.5.1...v0.6.0

- Python
Published by garciagenrique about 4 years ago

lstmcpipe - v0.5.1

Working version with - lstchain v0.7.5 (v0.8.0 to be tested soon) - HiPeRTA v4.0.0-dev - HiPeRTA uses hdf5-R0 files converted from simtel by using ctapipeiomchdf5 v0.3.1-dev

What's Changed

update version at init file by @garciagenrique in https://github.com/cta-observatory/lstmcpipe/pull/99
path to images in reorganized dl1 (lstchain-like) is wrong by @garciagenrique in https://github.com/cta-observatory/lstmcpipe/pull/102
fix path to images in DL1 files by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/100
plot models features importance by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/88
No image arg to config file by @garciagenrique in https://github.com/cta-observatory/lstmcpipe/pull/116
Make merge utils script an entry point by @garciagenrique in https://github.com/cta-observatory/lstmcpipe/pull/117
CI by @garciagenrique in https://github.com/cta-observatory/lstmcpipe/pull/118
incorrect syntax in ci.yml by @garciagenrique in https://github.com/cta-observatory/lstmcpipe/pull/119
Fix relative import to work after installation by @LukasNickel in https://github.com/cta-observatory/lstmcpipe/pull/120
ctapipe support by @LukasNickel in https://github.com/cta-observatory/lstmcpipe/pull/111
add script to plot sensitivity by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/89
update RTA reorganiser with correct paths by @garciagenrique in https://github.com/cta-observatory/lstmcpipe/pull/122
Refactor stages script to take out the 'scripting' functionality by @garciagenrique in https://github.com/cta-observatory/lstmcpipe/pull/121
Refactor bash files by @garciagenrique in https://github.com/cta-observatory/lstmcpipe/pull/123
Cleanup config code by @LukasNickel in https://github.com/cta-observatory/lstmcpipe/pull/124
Logging + X by @LukasNickel in https://github.com/cta-observatory/lstmcpipe/pull/125
remove leftover function by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/127
put all particle under long queue by @garciagenrique in https://github.com/cta-observatory/lstmcpipe/pull/128
fix issue mkdir when parent is . by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/129
Reformat everything with black by @LukasNickel in https://github.com/cta-observatory/lstmcpipe/pull/126
Update default outfile in scriptdl2to_sensitivity.py by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/131
Documentation by @LukasNickel in https://github.com/cta-observatory/lstmcpipe/pull/132
Adding codemeta.json file for standard metadata by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/134
Add compare irfs script by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/133
Pathlib by @LukasNickel in https://github.com/cta-observatory/lstmcpipe/pull/130
update quickstart with correct entry point by @garciagenrique in https://github.com/cta-observatory/lstmcpipe/pull/136
remove dl1todl2 training file from list of file to be processed by @garciagenrique in https://github.com/cta-observatory/lstmcpipe/pull/137
Test scripts are installed correctly by @garciagenrique in https://github.com/cta-observatory/lstmcpipe/pull/138
Sphinx docs by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/142
package information read from codemeta by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/143
installing package before generating doc by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/144
update source file and conda env with new env at the cluster by @garciagenrique in https://github.com/cta-observatory/lstmcpipe/pull/145
take out --smart argument from lstchainmergehdf5_files on lstchain … by @garciagenrique in https://github.com/cta-observatory/lstmcpipe/pull/146
Fix issues with sensitivity calculation and plots by @vuillaut in https://github.com/cta-observatory/lstmcpipe/pull/148

New Contributors

@LukasNickel made their first contribution in https://github.com/cta-observatory/lstmcpipe/pull/120

Full Changelog: https://github.com/cta-observatory/lstmcpipe/compare/v0.4.1...v0.5.0

- Python
Published by vuillaut about 4 years ago

lstmcpipe - v0.4.1

Working version with

lstchain v0.6.3
HiPeRTA v4.0.0-dev
- HiPeRTA uses hdf5-R0 files converted from simtel by using ctapipe_io_mchdf5 v0.3.1-dev

- Python
Published by garciagenrique almost 5 years ago

lstmcpipe - Alignement with ctapipe 0.8.0

Working version with - lstchain v0.6.0 - HiPeRTA v3.0.0 - HiPeRTA uses hdf5-R0 files converted from simtel by using ctapipe_io_mchdf5 v0.2.1-dev

- Python
Published by garciagenrique over 5 years ago

lstmcpipe - v0.3.1

Minor bug release (reorganizer not aligned with the version) and upgrade of README.

Working version with: - lstchain v0.6.0 - HiPeRTA v2.0.2

- Python
Published by garciagenrique over 5 years ago

lstmcpipe - v0.3

Working version with: - lstchain 0.6.0 - HiPeRTA commit 31/08/2020; 95124004e15638b21734dc8e96dd7d059d2945ce

- Python
Published by garciagenrique over 5 years ago

lstmcpipe - v0.2

Working version with: - lstchain 0.5.2 - HiPeRTA commit f26cc2f3d2f127ee96ca7638572aa375a6137b24

- Python
Published by garciagenrique over 5 years ago

lstmcpipe - v0.1.1

Minor bug-fixing and improvement of functionalities (includes solutions up to #30. Only last two points of #27 are solved, though).

Working version with - lstchain v0.4.5 - HiPeRTA commit 3dd9675b9c2ccaf377a8b5e27966fe915225fdde

- Python
Published by garciagenrique almost 6 years ago

lstmcpipe - v0.1

Working version with: - lstchain v0.4.5 - hiperta commit a78210bc14e01bf0f0645f279c16f6bbdd6cd6be

- Python
Published by vuillaut almost 6 years ago

Recent Releases of lstmcpipe

lstmcpipe - v0.11.3

What's Changed

lstmcpipe - v0.11.2

What's Changed

lstmcpipe - v0.11.1

What's Changed

lstmcpipe - v0.11.0

What's Changed

New Contributors

lstmcpipe - v0.10.5

What's Changed

New Contributors

lstmcpipe - v0.10.4

What's Changed

New Contributors

lstmcpipe - v0.10.3

What's Changed

lstmcpipe - v0.10.2

What's Changed

New Contributors

lstmcpipe - v0.10.1

What's Changed

New Contributors

lstmcpipe - v0.10.0

What's Changed

New Contributors

lstmcpipe - v0.9.0

What's Changed

lstmcpipe - v0.8.6

What's Changed

lstmcpipe - v0.8.5

What's Changed

lstmcpipe - v0.8.4

What's Changed

lstmcpipe - v0.8.3

What's Changed

New Contributors

lstmcpipe - v0.8.2

What's Changed

lstmcpipe - v0.8.1

What's Changed

lstmcpipe - v0.7.3

What's Changed

lstmcpipe - v0.7.2

lstmcpipe - v0.7.1

What's Changed

lstmcpipe - v0.7

What's Changed

lstmcpipe - v0.6.3

What's Changed

lstmcpipe - v0.6.2

What's Changed

lstmcpipe - v0.6.1

What's Changed

lstmcpipe - v0.6.0

What's Changed

lstmcpipe - v0.5.1

What's Changed

New Contributors

lstmcpipe - v0.4.1

lstmcpipe - Alignement with ctapipe 0.8.0

lstmcpipe - v0.3.1

lstmcpipe - v0.3

lstmcpipe - v0.2

lstmcpipe - v0.1.1

lstmcpipe - v0.1