Recent Releases of satcat5
satcat5 - v2.7.0
- Added support for CoAP reverse-proxy.
- Added support for HDLC (physical layer only).
- Added support for RTTTL (legacy ringtone format).
- Completed Doxygen rollout to 100% of C++ files.
- Fixed edge-cases in CCSDS-AOS and CCSDS-SPP decoders.
- Fixed standards-compliance of UART flow-control signals.
- Improved support for complex CBOR data structures.
- Improved support for FreeRTOS and the SAM V71 microcontroller.
- New diagnostics for switches and routers, including reason why a given frame was dropped.
- New multi-mode UART toggles between raw, CCSDS-AOS, CCSDS-SPP, and SLIP mode.
- Software packet capture now supports multiple interfaces.
- Software router now supports basic network address translation (NAT).
- Split the ALLOWRUNT parameter into separate parameters ALLOWRUNTIN, ALLOWRUNT_OUT.
- VHDL
Published by ooterness 12 months ago
satcat5 - v2.6.0
- Added client/server for the Constrained Applications Protocol (CoAP)
- Added client/server for the Network Time Protocol (NTP)
- Added support for Doppler-PTP (an experimental extension to PTP)
- Added support for Simple-PTP (Meta's client-initiated PTP variant)
- Create a gateware-defined CIDR-capable IPv4 router supporting multiple gigabit-rate ports.
- Create a software-defined Ethernet switch, to augment or replace the FPGA-defined switch.
- Create a software-defined IPv4 router, for support/offload or low-rate standalone applications.
- Improved support for the Microchip Polarfire-FPGA and Polarfire-SoC platforms.
- Initial integration of Doxygen documentation. Limited coverage for now.
- More options for PTP filtering and control logic.
- More options for Readable and Writeable formats (s24, s48, u24, u48).
- New hardware abstraction layers for FreeRTOS and the Microchip SAM V71.
- Replace "GenericTimer" with the new and improved "TimeRef" API.
- Virtual PCAP mode for improved unit test diagnostics.
- VHDL
Published by ooterness over 1 year ago
satcat5 - v2.5.0
- License changed to CERN-OHL-W v2 or later.
- Added a software-based PTP client and clock-tuning interfaces.
- Added a software-based TFTP client and server.
- Added diagnostic tools for working with PCAP and PCAPNG files.
- Added support for many additional CRC16 and CRC32 formats.
- Improved log-message filtering for many unit tests.
- Improved status telemetry for managed switch diagnostics.
- New example design "vc707ptpclient".
- VHDL
Published by ooterness over 2 years ago
satcat5 - v2.4.0
- Added per-VLAN rate-limiting and associated device drivers.
- Added Slingshot interface control documents (ICDs).
- Added software-based DHCP client and server.
- Fixed "bidir_io" support on Lattice FPGAs.
- Fixed "mac_lookup" threshold for instantiating a second TCAM unit.
- Performance and tracking-filter improvements for PTP.
- Software support for 10-bit I2C addresses.
- Software support for various CBOR-encoded messages.
- VHDL
Published by ooterness almost 3 years ago
satcat5 - v2.3.0
- New
zcu208_clksynthexample design and associated device drivers. - New
sgmii_lvdsIP-core. - Port mode (portserialauto) is now CPU-configurable.
- Refactor C++ test utilities for better code-reuse.
- Update cfg::NetworkStats driver to allow remote access.
- Update poll::OnDemand main loop to prevent orphaned tasks.
- Update documenation and TCL scripts.
- VHDL
Published by ooterness over 3 years ago
satcat5 - v2.2.0
- Added Vernier-PLL system for timestamps with sub-nanosecond precision.
- Defined API for ingress and egress timestamps and integrated with all SatCat5 port types.
- More formatting options for the "satcat5::log" API, including signed decimal numbers.
- New all-in-one IP/UDP network stack for simplified software networking.
- New "log_viewer" diagnostic tool for display of messages from the "satcat5::log" API.
- Reworked TCAM and MAC-lookup blocks to allow runtime read/write of MAC-address tables.
- Tooltips for all IP-core configuration parameters.
- Bug-fixes for router_inline and MDIO device-driver.
- VHDL
Published by ooterness over 3 years ago
satcat5 - v2.0.0
- Added a large number of auxiliary ConfigBus peripherals, with cross-platform software drivers.
- Added I2C peripherals and Ethernet-over-I2C ports.
- Added the "MailMap" port, a higher-performance analogue to original MailBox port.
- Created an embedded cross-platform C++ driver framework, including a IP and UDP network stack.
- Replaced all prior MAC-lookup systems with a flexible high-performance TCAM.
- Replaced various ad-hoc control and configuration functions with "ConfigBus".
- Reworked switch-core to allow higher maximum throughput, max one full packet per clock.
- Reworked switch-core to allow rudimentary IGMP snooping.
- Reworked switch-core to allow traffic prioritization based on EtherType.
- VHDL
Published by ooterness almost 5 years ago
satcat5 - v1.3.0
- Add support for 802.3D pause-frames.
- Improved error-handling and error-recovery on SGMII ports.
- Improved performance of Python/ScaPy interfaces by using L2Socket objects.
- Update ethframecheck to block frames where the source MAC is the broadcast address.
- VHDL
Published by ooterness over 5 years ago
satcat5 - v1.2.2
- Added contribution guidelines, issue templates, and pull-request templates to encourage outside contributions.
- Added IPv4 router block.
- New switch management features including traffic counters and per-port promiscuous-mode.
- Xilinx platform: Added block-diagram IP-core wrappers for many functional blocks.
- VHDL
Published by ooterness over 5 years ago