nanoseq - nf-core/nanoseq v3.1.0 - NObelium Guppy

Major enhancements

• Removed the guppy basecaller as distributing it via a docker image is a breach to EULA
• Bump minimum Nextflow version from 21.10.3 -> 21.10.3
• Update pipeline template to nf-core/tools 2.7.2
• Update bambu version from 1.0.2 to 2.0.0

Parameters

• Removed --flowcell as nanoseq no longer supports basecalling
• Removed --kit as nanoseq no longer supports basecalling
• Removed --guppy_config as nanoseq no longer supports basecalling
• Removed --guppy_model as nanoseq no longer supports basecalling
• Removed --guppy_gpu as nanoseq no longer supports basecalling
• Removed --guppy_gpu_runners as nanoseq no longer supports basecalling
• Removed --guppy_cpu_threads as nanoseq no longer supports basecalling
• Removed --output_demultiplex_fast5 as nanoseq no longer supports basecalling
• Removed --skip_basecalling as nanoseq no longer supports basecalling
• Removed --skip_pycoqc as nanoseq no longer supports basecalling

Software dependencies

| Dependency | Old version | New version | | -------------------- | ----------- | ----------- | | bioconductor-bambu | 2.0.0 | 3.0.8 |

- Nextflow
Published by yuukiiwa almost 3 years ago

nanoseq - nf-core/nanoseq v3.0.0 - Zinc Kea

Major enhancements

• Add DNA variant calling functionality
• Add RNA modification and fusion detection functionalities
• Add demux_fast5 module to output demultiplexed fast5 files when --output_demultiplex_fast5 is set
• Add --trim_barcodes in Guppy basecaller to trim the barcodes from output fastq
• Port pipeline to the updated Nextflow DSL2 syntax adopted on nf-core/modules
• Removed --publish_dir_mode as it is no longer required for the new syntax
• Bump minimum Nextflow version from 21.04.0 -> 21.10.3
• Update pipeline template to nf-core/tools 2.2
• Update bambu version from 1.0.2 to 2.0.0
• Update multiqc version from 1.10.1 to 1.11

Parameters

• Added --output_demultiplex_fast5 to output demultiplexed fast5
• Added --trim_barcodes in Guppy basecaller to trim the barcodes from output fastq
• Added --call_variants to detect DNA variants
• Added --split_mnps to split multi-nucleotide polymorphisms into single nucleotide polymorphisms when using medaka
• Added --phase_vcf to output a phased vcf when using medaka
• Added --deepvariant_gpu to use gpu with docker peppermargindeepvariant
• Added --skip_vc to skip variant_calling
• Added --skip_sv to skip structural_variant_calling
• Added --variant_caller to specify variant caller.
• Added --structural_variant_caller to specify structural variant caller
• Added --skip_modification_analysis to skip RNA modification detection
• Added --skip_xpore to skip xpore
• Added --skip_m6anet to skip m6anet
• Added --skip_fusion_analysis to skip RNA fusion detection
• Added --jaffal_ref_dir to indicate the reference directory path required by JAFFAL

Software dependencies

| Dependency | Old version | New version | | ------------------------------- | ----------- | ----------- | | bioconductor-bambu | 1.0.2 | 2.0.0 | | bioconductor-bsgenome | 1.58.0 | 1.62.0 | | cutesv | | 1.0.12 | | deepvariant | | 1.0.3 | | jaffa | | 2.0 | | m6anet | | 1.0 | | medaka | | 1.4.4 | | multiqc | 1.10.1 | 1.11 | | ont_fast5_api | | 4.0.0 | | pepper_margin_deepvariant | | 0.8 | | pepper_margin_deepvariant_gpu | | 0.8 | | samtools | 1.14 | 1.15 | | sniffles | | 1.0.12 | | xpore | | 2.1 |

Bug fix

• The GET_TEST_DATA process now uses checks for any file in the path.

- Nextflow
Published by yuukiiwa over 3 years ago

nanoseq - nf-core/nanoseq v2.0.1 - Steel Sloth

Bug fix

• The UCSC_BEDGRAPHTOBIGWIG process now uses the ucsc-bedgraphtobigwig container
• The full-size and minimal AWS tests have successfully finished after changing to the ucsc-bedgraphtobigwig container

- Nextflow
Published by yuukiiwa about 4 years ago

nanoseq - nf-core/nanoseq v2.0.0 - Nickel Sloth

[2.0.0] - 2021-11-26

Major enhancements

• Pipeline has been re-implemented in Nextflow DSL2
• Software containers are now obtained from Biocontainers
• Update pipeline template to nf-core/tools 2.1
• #77 - Skipped alignment steps
• #97 - Add optional DNA cleaning option

Parameters

• Added --run_nanolyse to run NanoLyse for DNA cleaning of FastQ files
• Added --nanolyse_fasta to provide a fasta file for nanolyse to filter against

Software dependencies

| Dependency | Old version | New version | |-------------------------|-------------|-------------| | bioconductor-bambu | 1.0.0 | 1.0.2 | | nanolyse | | 1.2.0 | | r-base | 4.0.3 | 4.0.2 |

NB: Dependency has been updated if both old and new version information is present. NB: Dependency has been added if just the new version information is present. NB: Dependency has been removed if version information isn't present.

- Nextflow
Published by yuukiiwa over 4 years ago

nanoseq - nf-core/nanoseq v1.1.0 - Green Panda

[1.1.0] - 2020-11-06

Major enhancements

• Transcript reconstruction and quantification (bambu or StringTie2 and featureCounts)
• Differential expression analysis at the gene-level (DESeq2) and transcript-level (DEXSeq)
• Ability to provide BAM input to the pipeline
• Change samplesheet format to be more flexible to BAM input files
• Add pycoQC and featureCounts output to MultiQC report
• Add AWS full-sized test data
• Add parameter JSON schema for pipeline
• Add citations file
• Update pipeline template to nf-core/tools 1.11
• Collapsible sections for output files in docs/output.md
• Replace set with tuple and file with path in input section of all processes
• Capitalise process names
• Added --gpus all to Docker runOptions when using GPU as mentioned here
• Cannot invoke method containsKey() on null object when --igenomes_ignore is set #76

Parameters

• Added --barcode_both_ends requires barcode on both ends for Guppy basecaller
• Added --quantification_method to specify the transcript quantification method to use
• Added --skip_quantification to skip transcript quantification and differential analysis
• Added --skip_differential_analysis to skip differential analysis with DESeq2 and DEXSeq
• Added --publish_dir_mode to customise method of publishing results to output directory nf-core/tools#585

Software dependencies

| Dependency | Old version | New version | |-------------------------|-------------|-------------| | Guppy | 3.4.4 | 4.0.14 | | markdown | 3.1.1 | 3.3.3 | | multiqc | 1.8 | 1.9 | | nanoplot | 1.28.4 | 1.32.1 | | pygments | 2.5.2 | 2.7.2 | | pymdown-extensions | 6.0 | 8.0.1 | | python | 3.7.3 | 3.8.6 | | samtools | 1.9 | 1.11 | | ucsc-bedgraphtobigwig | 357 | 377 | | ucsc-bedtobigbed | 357 | 377 | | bioconductor-bambu | - | 1.0.0 | | bioconductor-bsgenome | - | 1.58.0 | | bioconductor-deseq2 | - | 1.30.0 | | bioconductor-dexseq | - | 1.36.0 | | bioconductor-drimseq | - | 1.18.0 | | bioconductor-stager | - | 1.12.0 | | r-base | - | 4.0.3 | | seaborn | - | 0.10.1 | | stringtie | - | 2.1.4 | | subread | - | 2.0.1 | | psutil | - | - |

NB: Dependency has been updated if both old and new version information is present.
NB: Dependency has been added if just the new version information is present.
NB: Dependency has been removed if version information isn't present.

- Nextflow
Published by drpatelh over 5 years ago

nanoseq - nf-core/nanoseq v1.0.0 - Silver Snail

[1.0.0] - 2020-03-05

Initial release of nf-core/nanoseq, created with the nf-core template.

- Nextflow
Published by drpatelh almost 6 years ago