Recent Releases of pbe
pbe - Version 4.3.0
Major Changes: - Update to Pelicun 3.6 and updated DL/Pelicun input panel to fully leverage the SimCenter Damage and Loss Model Library by showing all available methods
This material is based upon work supported by the U.S. National Science Foundation under Grants No. 1612843 and No. 2131111. Any opinions, findings, conclusions, or recommendations expressed in this material are those of the author(s) and do not necessarily reflect the views of the U.S. National Science Foundation.
- C++
Published by fmckenna about 1 year ago
pbe - Version 4.2.0
Major updates: - New Pelicun and DLML versions: Update to Pelicun 3.5 and the underlying SimCenter Damage and Loss Model Library (DLML). - New DL Databases: Through DLML, new models are available for damage and loss simulation: = Several models from Hazus developed for portfolio-type studies and suited for our R2D Tool are provided in PBE primarily for educational use. = The first release of the SimCenter Wind Component Library is a major enhancement that collects models from the literature to simulate wind-pressure-induced damage in high resolution at the component level. - References: When publications are referenced for a damage and loss model, they are shown in the user interface to encourage recognition of the work done by model developers. The DLML will be extended in future releases to provide comprehensive references for all models included. Currently, the SimCenter Wind Component Library has references for every model in it. - Optional Loss Calculations: You can opt out of loss calculation by selecting "None" under component repair consequence databases and turning all loss outputs off.
This material is based upon work supported by the U.S. National Science Foundation under Grants No. 1612843 and No. 2131111. Any opinions, findings, conclusions, or recommendations expressed in this material are those of the author(s) and do not necessarily reflect the views of the U.S. National Science Foundation.
- C++
Published by fmckenna over 1 year ago
pbe - Version 4.0.0
Major Changes Required for interfacing with DesignSafe the newly released Version 3 of Tapis. Updated major version to reflect Preferences need updating, and that for users submitting jobs to TACC HPC resources additional set-up steps and user input is required.
This work is based on material supported by the National Science Foundation under grants CMMI 1612843 and 2131111
- C++
Published by fmckenna almost 2 years ago
pbe - Version 3.5.0
Major New Features:
- Adding multi-model event option allowing different events in multi-model or multi0fidelity simulations
- Adding option in Physics based motions to select from motions created for Istanbul area
This work is based on material supported by the National Science Foundation under grants CMMI 1612843 and 2131111
- C++
Published by fmckenna almost 2 years ago
pbe - Version 3.4.0
- Ability to select from Physics based ground motions generated by M9 project
- Update the Pelicun3 Damage and Loss engine to v3.3 which includes Location-specific damage processes and Multilinear CDF random variable and bug fixes/
- C++
Published by fmckenna about 2 years ago
pbe - Version 3.2.0
New for Verison 3.2.0:
- Integration of ARUP's Resilience-based Engineering Design Initiative (REDi) performance assessment.
- Ability to utilize multi-fidelity Monte Carlo for simulation of building response given models of different fidelity
- C++
Published by fmckenna over 2 years ago
pbe - Version 3.1.0
New features:
- Application can now output Carbon Emissions and Embodied Energy per Perform P-58 2nd Edition, Volume 4
- The Fragility and Consequence function included
- Ability to utilize multi-model and multi-fem options in the response determination of the building
- C++
Published by fmckenna about 3 years ago
pbe - Version 3.0.0
Major updates:
- Built on v4.0 of SimCenter's backend application framework. Major updates in the backend: -Redesigned and generalized UQ architecture -Generalized workflow managers support non-building assets -Surrogate modeling capabilities for characterizing events and earthquake response
- All features of EE-UQ up to v3.2.0, including: -Advanced options for PEER NGA Event selection -Site-specific seismic disaggregation -Steel and concrete building model generators -MDOF-LU approximate shear column model generator -Concrete Building Model Generator
- Redesigned user interface for Performance Assessment with Pelicun 3: -Takes advantage of the new databases developed for Pelicun 3 to allow users to use custom components, demands, damage processes, and consequence functions. -Decouples and generalizes demand, damage, and loss calculations. -Enables performance assessment under any type of natural hazard event -Supports modeling cascading damages -Supports custom mapping between damage states and consequence functions -Supports global consequences with uncertainty (e.g., uncertain replacement cost) -Substantial improvement in computational efficiency for large performance models -Two redesigned examples demonstrate capabilities
- C++
Published by fmckenna over 3 years ago
pbe - Release v2.0.0
PBE v2.0.0 updates include * All updates in EE-UQ from version v1.2.0 to v2.0.1 changes * Update DL interface: * General settings are organized around Damage, Response, and Loss Models * Components tab got a completely new look that facilitates the definition of component groups for each fragility group. * Dependencies moved to a new, fourth tab that will eventually house all advanced functionality * Support for loading and saving performance model (i.e., component definitions) using standard csv files. * Support for loading external EDP files using standard csv files. This enables the user to run a loss assessment without running the response estimation inside PBE. * Added damage and loss data from FEMA P58 second edition to the database. * Migrated to a new, more readable and flexible damage and loss model description in saved json files - not compatible with earlier versions.
- C++
Published by fmckenna over 6 years ago
pbe - Release v1.2.0
updated interface for DL, including version 1.2 changes in EE-UQ, changes to Agave for new jobs service, other UI enhancements
- C++
Published by fmckenna almost 7 years ago
pbe - Release v1.1.0
Sliightly modified UI, Improved performance and new Functionality added:
Structural Modeling: MDOF Ground Motion: Stochastic (Synthetic) Ground Motions, Site Response Analysis Damage & Loss Calculation: Hazus Loss Estimation
- C++
Published by fmckenna about 7 years ago