Data

Tools

Indexes

Applications

Experiments

Open Source Science

citation-bravo

FG Aircraft | Citation-Bravo

https://github.com/fgmembers/citation-bravo

Science Score: 18.0%

This score indicates how likely this project is to be science-related based on various indicators:

  • ✓
    CITATION.cff file
    Found CITATION.cff file
  • ○
    codemeta.json file
  • ○
    .zenodo.json file
  • ○
    DOI references
  • ○
    Academic links in README
  • ○
    Academic email domains
  • ○
    Institutional organization owner
  • ○
    JOSS paper metadata
  • ○
    Scientific vocabulary similarity
    Low similarity (0.2%) to scientific vocabulary
Last synced: 10 months ago · JSON representation ·

Repository

FG Aircraft | Citation-Bravo

Basic Info
  • Host: GitHub
  • Owner: FGMEMBERS
  • Default Branch: master
  • Size: 19.6 MB
Statistics
  • Stars: 0
  • Watchers: 48
  • Forks: 1
  • Open Issues: 0
  • Releases: 0
Created over 11 years ago · Last pushed almost 7 years ago
Metadata Files
Citation

Owner

  • Name: FGMEMBERS
  • Login: FGMEMBERS
  • Kind: organization

This Organization hosts development repositories for Flightgear Aircraft licensed under GPL clauses

Citation (Citation-Bravo-yasim.xml) 

<!--  Cessna Citation Bravo :

Length:        14.40 m
Wingspan:  15.75m
Cruise:  Weight / Altitude / Speed / Fuel Flow

WEIGHT (lbs)    11,000          13,000          14,500
Altitude (ft)   Speed (KTAS)/fuel flow (lbs/hr)
33,000          405/1,200         401/1,197         396/1,195
35,000          403/1,123         398/1,134         390/1,124
37,000          400/1,040         390/1,029         382/1,023
39,000          394/934              382/926          374/917
41,000          387/844              375/835          366/830
43,000          378/750             366/751         359/752

stall speed  86kt -landing configuration at 13,500 lbs;
note: 1.3 Vs1 = 0.6 AOA

Vref 98
V2 116

NACA 23014 root
NACA 23012 tip -3 degree twist
-->

<airplane mass="8750">
    <approach speed="100" aoa="5" fuel="0.2">
        <control-setting axis="/controls/engines/engine[0]/throttle-lever" value="0.15"/>
        <control-setting axis="/controls/engines/engine[1]/throttle-lever" value="0.15"/>
        <control-setting axis="/controls/engines/engine[0]/mixture" value="1.0"/>
        <control-setting axis="/controls/engines/engine[1]/mixture" value="1.0"/>
        <control-setting axis="/controls/flight/flaps" value="1"/>
        <control-setting axis="/controls/gear/gear-down" value="1"/>
    </approach>

    <cruise speed="401" alt="33000" fuel="0.8">
        <control-setting axis="/controls/engines/engine[0]/throttle-lever" value="0.75"/>
        <control-setting axis="/controls/engines/engine[1]/throttle-lever" value="0.75"/>
        <control-setting axis="/controls/engines/engine[0]/mixture" value="1.0"/>
        <control-setting axis="/controls/engines/engine[1]/mixture" value="1.0"/>
        <control-setting axis="/controls/flight/flaps" value="0.0"/>
        <control-setting axis="/controls/gear/gear-down" value="0"/>
     </cruise>

    <cockpit x="-2.75" y="0.38" z="0.91"/>
    <!-- FUSELAGE -->
    <fuselage ax="0" ay="0" az="0.02" bx="-2.838" by="0" bz="0.514"
    width="1.60" taper="0.2" midpoint="1.0" idrag="0"/>

    <fuselage ax="-2.838" ay="0" az="0.514" bx="-8.667" by="0" bz="0.514"
    width="1.60" taper="1" midpoint="0.4" idrag="0"/>

    <fuselage ax="-8.667" ay="0" az="0.514" bx="-13.656" by="0" bz="0.870"
    width="1.60" taper="0.1" midpoint="0.0" idrag="0"/>

    <!-- Engines  -->
    <fuselage ax="-8.016" ay="1.33" az="0.893" bx="-10.336" by="1.33" bz="0.893"
    width="0.92" taper="0.5" midpoint="0.25" idrag="0"/>

    <fuselage ax="-8.016" ay="-1.33" az="0.893" bx="-10.336" by="-1.33" bz="0.893"
    width="0.92" taper="0.5" midpoint="0.25" idrag="0"/>


    <wing x="-7.0" y="0.8" z="-0.12" length="7.075" chord="2.72"
    sweep="0" dihedral="4" taper="0.33" camber="0.0"
    incidence="3.0" twist="-3.0" idrag="1.20">
        <stall aoa="15" width="8" peak="1.5"/>
        <flap0 start="0" end=".52" lift="1.5" drag="1.6"/>
        <flap1 start=".52" end=".88" lift="1.3" drag="1.1"/>
        <spoiler start="0.3" end="0.50" lift="1.0" drag="2.0"/>
        <control-input axis="/controls/flight/flaps" control="FLAP0"/>
        <control-input axis="/controls/flight/aileron" control="FLAP1" split="true"/>
        <control-input axis="/controls/flight/aileron-trim" control="FLAP1" split="true"/>
        <control-input axis="/controls/flight/speedbrake" control="SPOILER"/>
        <control-output control="FLAP0" prop="/surface-positions/flap-pos-norm"/>
        <control-output control="FLAP1" side="left" prop="/surface-positions/left-aileron-pos-norm"/>
        <control-output control="FLAP1" side="right" prop="/surface-positions/right-aileron-pos-norm"/>
        <control-output control="SPOILER" prop="/surface-positions/speedbrake-pos-norm"/>
        <control-speed control="FLAP0" transition-time="5"/>
        <control-speed control="SPOILER" transition-time="1"/>
    </wing>

    <hstab x="-12.64" y="0.05" z="1.48" length="2.88" chord="1.48"
    sweep="0" dihedral="9" taper="0.53" camber="0.0">
        <stall aoa="14" width="5" peak="1.5"/>
        <flap0 start="0" end="1" lift="1.5" drag="1.2"/>
        <control-input axis="/controls/flight/elevator" control="FLAP0"/>
        <control-input axis="/controls/flight/elevator-trim" control="FLAP0"/>
        <control-output control="FLAP0" prop="/surface-positions/elevator-pos-norm"/>
    </hstab>

    <vstab x="-12.43" y="0.00" z="1.03" length="2.60" chord="2.48"
    sweep="26.5" taper="0.46">
        <stall aoa="16" width="5" peak="1.5"/>
        <flap0 start="0" end="1" lift="1.4" drag="1.2"/>
        <control-input axis="/controls/flight/rudder" control="FLAP0" invert="true"/>
        <control-input axis="/controls/flight/rudder-trim" control="FLAP0" invert="true"/>
        <control-output control="FLAP0" prop="/surface-positions/rudder-pos-norm"/>
    </vstab>

<!-- gear drag-->

    <mstab x="-7.36" y="2.7" z="0" length="0.5" chord="0.5">
        <flap0 start="0" end="1" lift="1" drag="20"/>
        <control-input axis="gear/gear[0]/position-norm" control="FLAP0"/>
    </mstab>

    <mstab x="0.0" y="0.0" z="0.0" length="0.001" chord="0.001">
        <flap0 start="0" end="1" lift="1" drag="0"/>
        <control-input axis="controls/cabin-door/open" control="FLAP0"/>
        <control-speed control="FLAP0" transition-time="2"/>
        <control-output control="FLAP0" prop="controls/cabin-door/position-norm"/>
    </mstab>

    <tank x="-7.0" y="1.7" z="0.1" capacity="2493" jet="true"/>
    <tank x="-7.0" y="-1.7" z="0.1" capacity="2493" jet="true"/>

    <gear x="-1.669" y="0.00" z="-0.964" compression=".4" retract-time="6"
    sfric="0.8" dfric="0.7">
        <control-input axis="/controls/flight/rudder" control="STEER" square="true"/>
        <control-input axis="/controls/gear/gear-down" control="EXTEND"/>
        <control-speed control="EXTEND" transition-time="4"/>
        <control-output control="EXTEND" prop="/gear/gear[0]/position-norm"/>
    </gear>

    <gear x="-7.5" y="2.8" z="-0.961" compression=".4" retract-time="6.1"
    sfric="0.9" dfric="0.9">
        <control-input axis="/controls/gear/brake-left" control="BRAKE"/>
        <control-input axis="/controls/gear/brake-parking" control="BRAKE"/>
        <control-input axis="/controls/gear/gear-down" control="EXTEND"/>
        <control-speed control="EXTEND" transition-time="4.1"/>
        <control-output control="EXTEND" prop="/gear/gear[1]/position-norm"/>
    </gear>

    <gear x="-7.5" y="-2.8" z="-0.961" compression=".4" retract-time="6.2"
    sfric="0.9" dfric="0.9">
        <control-input axis="/controls/gear/brake-right" control="BRAKE"/>
        <control-input axis="/controls/gear/brake-parking" control="BRAKE"/>
        <control-input axis="/controls/gear/gear-down" control="EXTEND"/>
        <control-speed control="EXTEND" transition-time="4.2"/>
        <control-output control="EXTEND" prop="/gear/gear[2]/position-norm"/>
    </gear>

<!-- Pratt and Whitney Canada Inc. PW530A Turbofan
2750 lbs thrust
3.2 bypass ratio
dry wgt 616.5 lbs
-->

    <jet x="-8.9" y="1.35" z="0.9" mass="620" thrust="2750" tsfc="0.55"
    epr="3.2" rotate="0" n1-idle="45" n1-max="103.0" n2-idle="45.5"
    n2-max="105" spool-time="2.5">
        <control-input axis="/controls/engines/engine[0]/throttle-lever"
        control="THROTTLE"/>
        <control-input axis="/controls/engines/engine[0]/mixture" control="MIXTURE"/>
        <control-input axis="/controls/engines/engine[0]/reverser" control="REVERSE_THRUST"/>
        <control-output control="REVERSE_THRUST" prop="/surface-positions/reverser-norm"/>
        <control-speed control="REVERSE_THRUST" transition-time="1.5"/>
        <actionpt x="-10.5" y="1.37" z="0.76"/>
    </jet>

    <jet x="-8.9" y="-1.35" z="0.9" mass="620" thrust="2750" tsfc="0.55"
    epr="3.2" rotate="0" n1-idle="45" n1-max="103.0" n2-idle="45.5"
    n2-max="105" spool-time="2.5">
        <control-input axis="/controls/engines/engine[1]/throttle-lever"
        control="THROTTLE"/>
        <control-input axis="/controls/engines/engine[1]/mixture" control="MIXTURE"/>
        <control-input axis="/controls/engines/engine[1]/reverser" control="REVERSE_THRUST"/>
        <control-output control="REVERSE_THRUST" prop="/surface-positions/reverser-norm[1]"/>
        <control-speed control="REVERSE_THRUST" transition-time="1.5"/>
        <actionpt x="-10.5" y="-1.37" z="0.76"/>
    </jet>

    <ballast x="-12.43" y="0.0" z="2.0" mass="-1000"/>
    <ballast x="-12.64" y="0.0" z="1.48" mass="-800"/>

    <weight x="-2.7" y="0" z="-0.5" mass-prop="/sim/weight[0]/weight-lb"/>
    <weight x="-7.0" y="0" z="-0.5" mass-prop="/sim/weight[1]/weight-lb"/>
    <weight x="-1.5" y="0" z="-0.5" mass-prop="/sim/weight[2]/weight-lb"/>
    <weight x="-8.5" y="0" z="-0.5" mass-prop="/sim/weight[3]/weight-lb"/>
</airplane>

GitHub Events

Total
Last Year