uwot - CRAN release 0.2.3

uwot 0.2.3

New features:

• New parameter: rng_type. This will be used in favor of the boolean pcg_rand parameter, although pcg_rand will still work for backwards compatibility.
• New negative sampling option: set rng_type = "deterministic" to use a deterministic sampling of vertices during the optimization phase. This should give qualitatively similar results to using a real PRNG, but has the advantage of being faster and giving more reproducible output. This feature was inspired by a comment by Leland McInnes on Reddit.

Bug fixes and minor improvements

• Setting num_threads directly in umap2 did not result in the number of SGD threads being updated to that value when batch = TRUE, which it should have been.
• Despite assertions to the contrary in version 0.2.1, umap_transform continued to return the fuzzy graph in transposed form. Thank you PedroMilanezAlmeida for reopening the issue (https://github.com/jlmelville/uwot/issues/118).
• Relative paths could not be used to save a model. Thank you Wouter van der Bijl for the bug report (https://github.com/jlmelville/uwot/issues/131) and the suggested fix.
• repulsion_strength was silently ignored if used with tumap or umap2 with a = 1, b = 1. Ignoring the setting was on purpose, but it was not documented anywhere. repulsion_strength is now compatible with these settings.
• It's no longer an error to provide a pca argument if the input data has a maximum rank smaller than the value of pca. No PCA is applied in this case. If verbose = TRUE, a message will be printed to inform the user.

- R
Published by jlmelville 12 months ago

uwot - CRAN release 0.2.2

uwot 0.2.2

Bug fixes and minor improvements

• RSpectra is now a required dependency (again). It was a required dependency up until version 0.1.12, when it became optional (irlba was used in its place). However, problems with interactions of the current version of irlba with an ABI change in the Matrix package means that it's hard for downstream packages and users to build uwot without re-installing Matrix and irlba from source, which may not be an option for some people. Also it was causing a CRAN check error. I have changed some tests, examples and vignettes to use RSpectra explicitly, and to only test irlba code-paths where necessary. See https://github.com/jlmelville/uwot/issues/115 and links therein for more details.

- R
Published by jlmelville almost 2 years ago

uwot - CRAN release 0.2.1

uwot 0.2.1

New features:

• The HNSW approximate nearest neighbor search algorithm is now supported via the RcppHNSW package. Set nn_method = "hnsw" to use it. The behavior of the method can be controlled by the new nn_args parameter, a list which may contain M, ef_construction and ef. See the hnswlib library's ALGO_PARAMS documentation for details on these parameters. Although typically faster than Annoy (for a given accuracy), be aware that the only supported metric values are "euclidean", "cosine" and "correlation". Finally, RcppHNSW is only a suggested package, not a requirement, so you need to install it yourself (e.g. via install.packages("RcppHNSW")). Also see the article on HNSW in uwot in the documentation.
• The nearest neighbor descent approximate nearest neighbor search algorithm is now supported via the rnndescent package. Set nn_method = "nndescent" to use it. The behavior of the method can be controlled by the new nn_args parameter. There are many supported metrics and possible parameters that can be set in nn_args, so please see the article on nearest neighbor descent in uwot in the documentation, and also the rnndescent package's documentation for details. rnndescent is only a suggested package, not a requirement, so you need to install it yourself (e.g. via install.packages("rnndescent")).
• New function: umap2, which acts like umap but with modified defaults, reflecting my experience with UMAP and correcting some small mistakes. See the umap2 article for more details.

Bug fixes and minor improvements

• init_sdev = "range" caused an error with a user-supplied init matrix.
• Transforming new data with the correlation metric was actually using the cosine metric if you saved and reloaded the model. Thank you Holly Hall for the report and helpful detective work (https://github.com/jlmelville/uwot/issues/117).
• umap_transform could fail if the new data to be transformed had the scaled:center and scaled:scale attributes set (e.g. from applying the scale function).
• If you asked umap_transform to return the fuzzy graph (ret_extra = c("fgraph")), it was transposed when batch = TRUE, n_epochs = 0. Thank you PedroMilanezAlmeida for reporting (https://github.com/jlmelville/uwot/issues/118).
• Setting n_sgd_threads = "auto" with umap_transform caused a crash.
• A warning was being emitted due to not being specific enough about what dist class was meant that may have been particularly affecting Seurat users. Thank you AndiMunteanu for reporting (and suggesting a solution) (https://github.com/jlmelville/uwot/issues/121).

- R
Published by jlmelville almost 2 years ago

uwot - CRAN release 0.1.16

uwot 0.1.16

Bug fixes and minor improvements

• A small change to a header file was required to fully support the next version of RcppAnnoy. Thank you Dirk Eddelbuettel for the PR (https://github.com/jlmelville/uwot/issues/112).

- R
Published by jlmelville over 2 years ago

uwot - CRAN release 0.1.15

New features

• New function: optimize_graph_layout. Use this to produce optimized output coordinates that reflect an input similarity graph (such as that produced by the similarity_graph function. similarity_graph followed by optimize_graph_layout is the same as running umap, so the purpose of these functions is to allow for more flexibility and decoupling between generating the nearest neighbor graph and optimizing the low-dimensional approximation to it. Based on a request by user Chengwei94 (https://github.com/jlmelville/uwot/issues/98).
• New functions: simplicial_set_union and simplicial_set_intersect. These allow for the combination of different fuzzy graph representations of a dataset into a single fuzzy graph using the UMAP simplicial set operations. Based on a request in the Python UMAP issues tracker by user Dhar xion.
• New parameter for umap_transform: ret_extra. This works like the equivalent parameter for umap, and should be a character vector specifying the extra information you would like returned in addition to the embedding, in which case a list will be returned with an embedding member containing the optimized coordinates. Supported values are "fgraph", "nn", "sigma" and "localr". Based on a request by user PedroMilanezAlmeida (https://github.com/jlmelville/uwot/issues/104).
• New parameter from umap, tumap and umap_transform: seed. This will do the equivalent of calling set.seed internally, and hence will help with reproducibility. The chosen seed is exported if ret_model = TRUE and umap_transform will use that seed if present, so you only need to specify it in umap_transform if you want to change the seed. The default behavior remains to not modify the random number state. Based on a request by SuhasSrinivasan (https://github.com/jlmelville/uwot/issues/110).

Bug fixes and minor improvements

• A new setting for init_sdev: set init_sdev = "range" and initial coordinates will be range-scaled so each column takes values between 0-10. This pre-processing was added to the Python UMAP package at some point after uwot began development and so should probably always be used with the default init = "spectral" setting. However, it is not set by default to maintain backwards compatibility with older versions of uwot.
• ret_extra = c("sigma") is now supported by lvish. The Gaussian bandwidths are returned in a sigma vector. In addition, a vector of intrinsic dimensionalities estimated for each point using an analytical expression of the finite difference method given by Lee and co-workers is returned in the dint vector.
• The min_dist and spread parameters are now returned in the model when umap is run with ret_model = TRUE. This is just for documentation purposes, these values are not used directly by the model in umap_transform. If the parameters a and b are set directly when invoking umap, then both min_dist and spread will be set to NULL in the returned model. This feature was added in response to a question from kjiang18 (https://github.com/jlmelville/uwot/issues/95).
• Some new checks for NA values in input data have been added. Also a warning will be emitted if n_components seems to have been set too high.
• If n_components was greater than n_neighbors then umap_transform would crash the R session. Thank you to ChVav for reporting this (https://github.com/jlmelville/uwot/issues/102).
• Using umap_transform with a model where dens_scale was set could cause a segmentation fault, destroying the session. Even if it didn't it could give an entirely artifactual "ring" structure. Thank you FemkeSmit for reporting this and providing assistance in diagnosing the underlying cause (https://github.com/jlmelville/uwot/issues/103).
• If you set binary_edge_weights = TRUE, this setting was not exported when ret_model = TRUE, and was therefore not respected by umap_transform. This has now been fixed, but you will need to regenerate any models that used binary edge weights.
• The rdoc for the init param said that if there were multiple disconnected components, a spectral initialization would attempt to merge multiple sub-graphs. Not true: actually, spectral initialization is abandoned in favor of PCA. The documentation has been updated to reflect the true state of affairs. No idea what I was thinking of there.
• load_model and save_model didn't work on Windows 7 due to how the version of tar there handles drive letters. Thank you mytarmail for the report (https://github.com/jlmelville/uwot/issues/109).
• Warn if the initial coordinates have a very large scale (a standard deviation > 10.0), because this can lead to small gradients and poor optimization. Thank you SuhasSrinivasan for the report (https://github.com/jlmelville/uwot/issues/110).
• A change to accommodate a forthcoming version of RcppAnnoy. Thank you Dirk Eddelbuettel for the PR (https://github.com/jlmelville/uwot/issues/111).
• A test was failing on Arm architectures. Problem has been "solved" by removing the test, but it was testing a floating point value resulting from a failure due to numerical issues, so it's a bit of a corner case. Thank you Lucas Kanashiro for reporting (https://github.com/jlmelville/uwot/issues/100).

- R
Published by jlmelville over 2 years ago

uwot - CRAN release 0.1.14

uwot 0.1.14

New features

• New function: similarity_graph. If you are more interested in the high-dimensional graph/fuzzy simplicial set representation of your input data, and don't care about the low dimensional approximation, the similarity_graph function offers a similar API to umap, but neither the initialization nor optimization of low-dimensional coordinates will be performed. The return value is the same as that which would be returned in the results list as the fgraph member if you had provided ret_extra = c("fgraph"). Compared to getting the same result via running umap, this function is a bit more convenient to use, makes your intention clearer if you would be discarding the embedding, and saves a small amount of time. A t-SNE/LargeVis similarity graph can be returned by setting method = "largevis".

Bug fixes and minor improvements

• If a model was generated without using pre-generated nearest neighbors, you couldn't use umap_transform with pre-generated nearest neighbors (also the error message was completely useless).Thank you to AustinHartman for reporting this (https://github.com/jlmelville/uwot/issues/97).

- R
Published by jlmelville over 3 years ago

uwot - CRAN release 0.1.13

uwot 0.1.13

• This is a resubmission of 0.1.12 but with an internal function (fuzzy_simplicial_set) refactored to behave more like that of previous versions. This change was breaking the behavior of the CRAN package bbknnR.

It would be pointless to release 0.1.12 as well as 0.1.13 as they are so similar. So here are the releases notes for 0.1.12:

uwot 0.1.12

New features

• New parameter: dens_weight. If set to a value between 0 and 1, an attempt is made to include the relative local densities of the input data in the output coordinates. This is an approximation to the densMAP method. A large value of dens_weight will use a larger range of output densities to reflect the input data. If the data is too spread out, reduce the value of dens_weight. For more information see the documentation at the uwot repo.
• New parameter: binary_edge_weights. If set to TRUE, instead of smoothed knn distances, non-zero edge weights all have a value of 1. This is how PaCMAP works and there is practical and theoretical reasons to believe this won't have a big effect on UMAP but you can try it yourself.
• New options for ret_extra:
  • "sigma": the return value will contain a sigma entry, a vector of the smooth knn distance scaling normalization factors, one for each observation in the input data. A small value indicates a high density of points in the local neighborhood of that observation. For lvish the equivalent bandwidths calculated for the input perplexity is returned.
  • also, a vector rho will be exported, which is the distance to the nearest neighbor after the number of neighbors specified by the local_connectivity. Only applies for umap and tumap.
  • "localr": exports a vector of the local radii, the sum of sigma and rho and used to scale the output coordinates when dens_weight is set. Even if not using dens_weight, visualizing the output coordinates using a color scale based on the value of localr can reveal regions of the input data with different densities.
• For functions umap and tumap only: new data type for precomputed nearest neighbor data passed as the nn_method parameter: you may use a sparse distance matrix of format dgCMatrix with dimensions N x N where N is the number of observations in the input data. Distances should be arranged by column, i.e. a non-zero entry in row j of the ith column indicates that the jth observation in the input data is a nearest neighbor of the ith observation with the distance given by the value of that element. Note that this is a different format to the sparse distance matrix that can be passed as input to X: notably, the matrix is not assumed to be symmetric. Unlike other input formats, you may have a different number of neighbors for each observation (but there must be at least one neighbor defined per observation).
• umap_transform can also take a sparse distance matrix as its nn_method parameter if precomputed nearest neighbor data is used to generate an initial model. The format is the same as for the nn_method with umap. Because distances are arranged by columns, the expected dimensions of the sparse matrix is N_model x N_new where N_model is the number of observations in the original data and N_new is the number of observations in the data to be transformed.

Bug fixes and minor improvements

• Models couldn't be re-saved after loading. Thank you to ilyakorsunsky for reporting this (https://github.com/jlmelville/uwot/issues/88).
• RSpectra is now a 'Suggests', rather than an 'Imports'. If you have RSpectra installed, it will be used automatically where previous versions required it (for spectral initialization). Otherwise, irlba will be used. For two-dimensional output, you are unlikely to notice much difference in speed or accuracy with real-world data. For highly-structured simulation datasets (e.g. spectral initialization of a 1D line) then RSpectra will give much better, faster initializations, but these are not the typical use cases envisaged for this package. For embedding into higher dimensions (e.g. n_components = 100 or higher), RSpectra is recommended and will likely out-perform irlba even if you have installed a good linear algebra library.
• init = "laplacian" returned the wrong coordinates because of a slightly subtle issue around how to order the eigenvectors when using the random walk transition matrix rather than normalized graph laplacians.
• The init_sdev parameter was ignored when the init parameter was a user-supplied matrix. Now the input will be scaled.
• Matrix input was being converted to and from a data frame during pre-processing, causing R to allocate memory that it was disinclined to ever give up even after the function exited. This unnecessary manipulation is now avoided.
• The behavior of the bandwidth parameter has been changed to give results more like the current version (0.5.2) of the Python UMAP implementation. This is likely to be a breaking change for non-default settings of bandwidth, but this is not a parameter which is actually exposed by the Python UMAP public API any more, so is on the road to deprecation in uwot too and I don't recommend you change this.
• Transforming data with multiple blocks would give an error if the number of rows of the new data did not equal the number of number of rows in the original data.

- R
Published by jlmelville over 3 years ago

uwot - CRAN release 0.1.11

uwot 0.1.11

New features

• New parameter: batch. If TRUE, then results are reproducible when n_sgd_threads > 1 (as long as you use set.seed). The price to be paid is that the optimization is slightly less efficient (because coordinates are not updated as quickly and hence gradients are staler for longer), so it is highly recommended to set n_epochs = 500 or higher. Thank you to Aaron Lun who not only came up with a way to implement this feature, but also wrote an entire C++ implementation of UMAP which does it (https://github.com/jlmelville/uwot/issues/83).
• New parameter: opt_args. The default optimization method when batch = TRUE is Adam. You can control its parameters by passing them in the opt_args list. As Adam is a momentum-based method it requires extra storage of previous gradient data. To avoid the extra memory overhead you can also use opt_args = list(method = "sgd") to use a stochastic gradient descent method like that used when batch = FALSE.
• New parameter: epoch_callback. You may now pass a function which will be invoked at the end of each epoch. Mainly useful for producing an image of the state of the embedding at different points during the optimization. This is another feature taken from umappp.
• New parameter: pca_method, used when the pca parameter is supplied to reduce the initial dimensionality of the data. This controls which method is used to carry out the PCA and can be set to one of:
  • "irlba" which uses irlba::irlba to calculate a truncated SVD. If this routine deems that you are trying to extract 50% or more of the singular vectors, you will see a warning to that effect logged to the console.
  • "rsvd", which uses irlba::svdr for truncated SVD. This method uses a small number of iterations which should give an accuracy/speed up trade-off similar to that of the scikit-learn TruncatedSVD method. This can be much faster than using "irlba" but potentially at a cost in accuracy. However, for the purposes of dimensionality reduction as input to nearest neighbor search, this doesn't seem to matter much.
  • "bigstatsr", which uses the bigstatsr package will be used. Note: that this is not a dependency of uwot. If you want to use bigstatsr, you must install it yourself. On platforms without easy access to fast linear algebra libraries (e.g. Windows), using bigstatsr may give a speed up to PCA calculations.
  • "svd", which uses base::svd. Warning: this is likely to be very slow for most datasets and exists as a fallback for small datasets where the "irlba" method would print a warning.
  • "auto" (the default) which uses "irlba" to calculate a truncated SVD, unless you are attempting to extract 50% or more of the singular vectors, in which case "svd" is used.

Bug fixes and minor improvements

• If row names are provided in the input data (or nearest neighbor data, or initialization data if it's a matrix), this will be used to name the rows of the output embedding (https://github.com/jlmelville/uwot/issues/81), and also the nearest neighbor data if you set ret_nn = TRUE. If the names exist in more than one of the input data parameters listed above, but are inconsistent, no guarantees are made about which names will be used. Thank you jwijffels for reporting this.
• In umap_transform, the learning rate is now down-scaled by a factor of 4, consistent with the Python implementation of UMAP. If you need the old behavior back, use the (newly added) learning_rate parameter in umap_transform to set it explicitly. If you used the default value in umap when creating the model, the correct setting in umap_transform is learning_rate = 1.0.
• Setting nn_method = "annoy" and verbose = TRUE would lead to an error with datasets with fewer than 50 items in them.
• Using multiple pre-computed nearest neighbors blocks is now supported with umap_transform (this was incorrectly documented to work).
• Documentation around pre-calculated nearest neighbor data for umap_transform was wrong in other ways: it has now been corrected to indicate that there should be neighbor data for each item in the test data, but the neighbors and distances should refer to items in training data (i.e. the data used to build the model).
• n_neighbors parameter is now correctly ignored in model generation if pre-calculated nearest neighbor data is provided.
• Documentation incorrectly said grain_size didn't do anything.

- R
Published by jlmelville about 4 years ago

uwot - CRAN release 0.1.10

uwot 0.1.10

This release is mainly to allow for some internal changes to keep compatibility with RcppAnnoy, used for the nearest neighbor calculations.

Bug fixes and minor improvements

• Passing in data with missing values will now raise an error early. Missing data in factor columns intended for supervised UMAP is still ok. Thank you David McGaughey for tweeting about this issue.
• The documentation for the return value of umap and tumap now note that the contents of the model list are subject to change and not intended to be part of the uwot public API. I recommend not relying on the structure of the model, especially if your package is intended to appear on CRAN or Bioconductor, as any breakages will delay future releases of uwot to CRAN.

- R
Published by jlmelville about 5 years ago

uwot - CRAN release 0.1.9

uwot 0.1.9

New features

• New metric: metric = "correlation" a distance based on the Pearson correlation (https://github.com/jlmelville/uwot/issues/22). Supporting this required a change to the internals of how nearest neighbor data is stored. Backwards compatibility with models generated by previous versions using ret_model = TRUE should have been preserved.

Big fixes and minor improvements

• New parameter, nn_method, for umap_transform: pass a list containing pre-computed nearest neighbor data (identical to that used in the umap function). You should not pass anything to the X parameter in this case. This extends the functionality for transforming new points to the case where nearest neighbor data between the original data and new data can be calculated external to uwot. Thanks to Yuhan Hao for contributing the PR (https://github.com/jlmelville/uwot/issues/63 and https://github.com/jlmelville/uwot/issues/64).
• New parameter, init, for umap_transform: provides a variety of options for initializing the output coordinates, analogously to the same parameter in the umap function (but without as many options currently). This is intended to replace init_weighted, which should be considered deprecated, but won't be removed until uwot 1.0 (whenever that is). Instead of init_weighted = TRUE, use init = "weighted"; replace init_weighted = FALSE with init = "average". Additionally, you can pass a matrix to init to act as the initial coordinates.
• Also in umap_transform: previously, setting n_epochs = 0 was ignored: at least one iteration of optimization was applied. Now, n_epochs = 0 is respected, and will return the initialized coordinates without any further optimization.
• Minor performance improvement for single-threaded nearest neighbor search when verbose = TRUE: the progress bar calculations were taking up a detectable amount of time and has now been fixed. With very small data sets (< 50 items) the progress bar will no longer appear when building the index.
• Passing a sparse distance matrix as input now supports upper/lower triangular matrix storage rather than wasting storage using an explicitly symmetric sparse matrix.
• Minor license change: uwot used to be licensed under GPL-3 only; now it is GPL-3 or later.

- R
Published by jlmelville over 5 years ago

uwot - CRAN release 0.1.8

uwot 0.1.8

Better late than never, here are the release notes for CRAN release 0.1.8. It's a bumper selection due to my failure to get 0.1.6 and 0.1.7 accepted.

New features

• New parameter, ret_extra, a vector which can contain any combination of: "model" (same as ret_model = TRUE), "nn" (same as ret_nn = TRUE) and fgraph (see below).
• New return value data: If the ret_extra vector contains "fgraph", the returned list will contain an fgraph item representing the fuzzy simplicial input graph as a sparse N x N matrix. For lvish, use "P" instead of "fgraph" (https://github.com/jlmelville/uwot/issues/47). Note that there is a further sparsifying step where edges with a very low membership are removed if there is no prospect of the edge being sampled during optimization. This is controlled by n_epochs: the smaller the value, the more sparsifying will occur. If you are only interested in the fuzzy graph and not the embedded coordinates, set n_epochs = 0.
• New function: unload_uwot, to unload the Annoy nearest neighbor indices in a model. This prevents the model from being used in umap_transform, but allows for the temporary working directory created by both save_uwot and load_uwot to be deleted. Previously, both load_uwot and save_uwot were attempting to delete the temporary working directories they used, but would always silently fail because Annoy is making use of files in those directories.
• An attempt has been made to reduce the variability of results due to different compiler and C++ library versions on different machines. Visually results are unchanged in most cases, but this is a breaking change in terms of numerical output. The best chance of obtaining floating point determinism across machines is to use init = "spca", fixed values of a and b (rather than allowing them to be calculated through setting min_dist and spread) and approx_pow = TRUE. Using the tumap method with init = "spca" is probably the most robust approach.

Big fixes and minor improvements

• default for n_threads is now NULL to provide a bit more protection from changing dependencies.
• uwot should no longer trigger undefined behavior in sanitizers, due to replacement of RcppParallel with the standard C++11 implementation of threading (and some code "borrowed" from RcppParallel) (https://github.com/jlmelville/uwot/issues/52).
• Further sanitizer improvements in the nearest neighbor search code due to the upstream efforts of erikbern and eddelbuettel (https://github.com/jlmelville/uwot/issues/50).
• New behavior when n_epochs = 0. This used to behave like (n_epochs = NULL) and gave a default number of epochs (dependent on the number of vertices in the dataset). Now it more usefully carries out all calculations except optimization, so the returned coordinates are those specified by the init parameter, so this is an easy way to access e.g. the spectral or PCA initialization coordinates. If you want the input fuzzy graph (ret_extra vector contains "fgraph"), this will also prevent the graph having edges with very low membership being removed. You still get the old default epochs behavior by setting n_epochs = NULL or to a negative value.
• save_uwot and load_uwot have been updated with a verbose parameter so it's easier to see what temporary files are being created.
• save_uwot has a new parameter, unload, which if set to TRUE will delete the working directory for you, at the cost of unloading the model, i.e. it can't be used with umap_transform until you reload it with load_uwot.
• save_uwot now returns the saved model with an extra field, mod_dir, which points to the location of the temporary working directory, so you should now assign the result of calling save_uwot to the model you saved, e.g. model <- save_uwot(model, "my_model_file"). This field is intended for use with unload_uwot.
• load_uwot also returns the model with a mod_dir item for use with unload_uwot.
• save_uwot and load_uwot were not correctly handling relative paths.
• A previous bug fix to load_uwot in uwot 0.1.4 to work with newer versions of RcppAnnoy (https://github.com/jlmelville/uwot/issues/31) failed in the typical case of a single metric for the nearest neighbor search using all available columns, giving an error message along the lines of: Error: index size <size> is not a multiple of vector size <size>. This has now been fixed, but required changes to both save_uwot and load_uwot, so existing saved models must be regenerated. Thank you to reporter OuNao.

- R
Published by jlmelville over 5 years ago

uwot - CRAN release 0.1.5

Bug fixes and minor improvements

• The R API was being accessed from inside multi-threaded code to seed the (non-R) random number generators. Probably this was causing users in downstream projects (seurat and monocle) to experience strange RcppParallel-related crashes. Thanks to aldojongejan for reporting this (https://github.com/jlmelville/uwot/issues/39).
• Passing a floating point value smaller than one to n_threads caused a crash. This was particularly insidious if running with a system with only one default thread available as the default n_threads becomes 0.5. Now n_threads (and n_sgd_threads) are rounded to the nearest integer.
• Initialization of supervised UMAP should now be faster (https://github.com/jlmelville/uwot/issues/34). Contributed by Aaron Lun.

- R
Published by jlmelville about 6 years ago

uwot - CRAN release 0.1.4

This release is to ensure the save/load capabilities of uwot continue to work with a forthcoming release of RcppAnnoy.

Bug fixes and minor improvements

• Fixed incorrect loading of Annoy indexes to be compatible with newer versions of RcppAnnoy (https://github.com/jlmelville/uwot/issues/31). My thanks to Dirk Eddelbuettel and Erik Bernhardsson for aid in identifying the problem.
• Fix for ERROR: there is already an InterruptableProgressMonitor instance defined.
• If verbose = TRUE, the a, b curve parameters are now logged.

- R
Published by jlmelville over 6 years ago

uwot - v0.1.3

Moments after getting uwot on CRAN, I found a horrible bug, necessitating this patch release.

Bug fixes and minor improvements

• Fixed an issue where the session would crash if the Annoy nearest neighbor search was unable to find k neighbors for an item.

Known issue

Even with a fix for the bug mentioned above, if the nearest neighbor index file is larger than 2GB in size, Annoy may not be able to read the data back in. This should only occur with very large or high-dimensional datasets. The nearest neighbor search will fail under these conditions. A work-around is to set n_threads = 0, because the index will not be written to disk and re-loaded under these circumstances, at the cost of a longer search time. Alternatively, set the pca parameter to reduce the dimensionality or lower n_trees, both of which will reduce the size of the index on disk. However, either may lower the accuracy of the nearest neighbor results.

- R
Published by jlmelville almost 7 years ago

uwot - v0.1.2

uwot 0.1.2 (April 6 2019)

Initial CRAN release.

New features

• New parameter, tmpdir, which allows the user to specify the temporary directory where nearest neighbor indexes will be written during Annoy nearest neighbor search. The default is base::tempdir(). Only used if n_threads > 1 and nn_method = "annoy".

Bug fixes and minor improvements

• Fixed an issue with lvish where there was an off-by-one error when calculating input probabilities.

• Added a safe-guard to lvish to prevent the gaussian precision, beta, becoming overly large when the binary search fails during perplexity calibration.

• The lvish perplexity calibration uses the log-sum-exp trick to avoid numeric underflow if beta becomes large.

- R
Published by jlmelville almost 7 years ago

uwot - v0.0.0.9010

New features

• New parameter: pcg_rand. If TRUE (the default), then a random number generator from the PCG family is used during the stochastic optimization phase. The old PRNG, a direct translation of an implementation of the Tausworthe "taus88" PRNG used in the Python version of UMAP, can be obtained by setting pcg_rand = FALSE. The new PRNG is slower, but is likely superior in its statistical randomness. This change in behavior will be break backwards compatibility: you will now get slightly different results even with the same seed.
• New parameter: fast_sgd. If TRUE, then the following combination of parameters are set: n_sgd_threads = "auto", pcg_rand = FALSE and approx_pow = TRUE. These will result in a substantially faster optimization phase, at the cost of being slightly less accurate and results not being exactly repeatable. fast_sgd = FALSE by default but if you are only interested in visualization, then fast_sgd gives perfectly good results. For more generic dimensionality reduction and reproducibility, keep fast_sgd = FALSE.
• New parameter: init_sdev which specifies how large the standard deviation of each column of the initial coordinates should be. This will scale any input coordinates (including user-provided matrix coordinates). init = "spca" can now be thought of as an alias of init = "pca", init_sdev = 1e-4. This may be too aggressive scaling for some datasets. The typical UMAP spectral initializations tend to result in standard deviations of around 2 to 5, so this might be more appropriate in some cases. If spectral initialization detects multiple components in the affinity graph and falls back to scaled PCA, it uses init_sdev = 1.
• As a result of adding init_sdev, the init options sspectral, slaplacian and snormlaplacian have been removed (they weren't around for very long anyway). You can get the same behavior by e.g. init = "spectral", init_sdev = 1e-4. init = "spca" is sticking around because I use it a lot.

Bug fixes and minor improvements

• Spectral initialization (the default) was sometimes generating coordinates that had too large a range, due to an erroneous scale factor that failed to account for negative coordinate values. This could give rise to embeddings with very noticeable outliers distant from the main clusters.
• Also during spectral initialization, the amount of noise being added had a standard deviation an order of magnitude too large compared to the Python implementation (this probably didn't make any difference though).
• If requesting a spectral initialization, but multiple disconnected components are present, fall back to init = "spca".
• Removed dependency on C++ <random> header. This breaks backwards compatibility even if you set pcg_rand = FALSE.
• metric = "cosine" results were incorrectly using the unmodified Annoy angular distance.
• Numeric matrix columns can be specified as the target for the categorical metric (fixes https://github.com/jlmelville/uwot/issues/20).

- R
Published by jlmelville almost 7 years ago

uwot - v0.0.0.9009

New features

• Data is now stored column-wise during optimization, which should result in an increase in performance for larger values of n_components (e.g. approximately 50% faster optimization time with MNIST and n_components = 50).
• New parameter: pca_center, which controls whether to center the data before applying PCA. It would be typical to set this to FALSE if you are applying PCA to binary data (although note you can't use this with setting with metric = "hamming")
• PCA will now be used when the metric is "manhattan" and "cosine". It's still not applied when using "hamming" (data still needs to be in binary format, not real-valued).
• If using mixed datatypes, you may override the pca and pca_center parameter values for a given data block by using a list for the value of the metric, with the column ids/names as an unnamed item and the overriding values as named items, e.g. instead of manhattan = 1:100, use manhattan = list(1:100, pca_center = FALSE) to turn off PCA centering for just that block. This functionality exists mainly for the case where you have mixed binary and real-valued data and want to apply PCA to both data types. It's normal to apply centering to real-valued data but not to binary data.

Bug fixes and minor improvements

• Fixed bug that affected umap_transform, where negative sampling was over the size of the test data (should be the training data).
• Some other performance improvements (around 10% faster for the optimization stage with MNIST).
• When verbose = TRUE, log the Annoy recall accuracy, which may help tune values of n_trees and search_k.

- R
Published by jlmelville about 7 years ago

uwot - v0.0.0.9008

New features

• New parameter: n_sgd_threads, which controls the number of threads used in the stochastic gradient descent. By default this is now single-threaded and should result in reproducible results when using set.seed. To get back the old, less consistent (but faster) settings, set n_sgd_threads = "auto".
• API change for consistency with Python UMAP:
  • alpha is now learning_rate.
  • gamma is now repulsion_strength.
• Default spectral initialization now looks for disconnected components and initializes them separately (also applies to laplacian and normlaplacian).
• New init options: sspectral, snormlaplacian and slaplacian. These are like spectral, normlaplacian, laplacian respectively, but scaled so that each dimension has a standard deviation of 1e-4. This is like the difference between the pca and spca options.

Bug fixes and minor improvements

• Hamming distance support (was actually using Euclidean distance).
• Smooth knn/perplexity calibration results had a small dependency on the number of threads used.
• Anomalously long spectral intialization times should now be reduced.
• Internal changes and fixes thanks to a code review by @LTLA.

- R
Published by jlmelville about 7 years ago

uwot - v0.0.0.9007

New features

• New parameter pca: set this to a positive integer to reduce matrix of data frames to that number of columns using PCA. Only works if metric = "euclidean". If you have > 100 columns, this can substantially improve the speed of the nearest neighbor search. t-SNE implementations often set this value to 50.

Bug fixes and minor improvements

• Laplacian Eigenmap initialization convergence failure is now correctly detected.
• C++ code was over-writing data passed from R as a function argument.

- R
Published by jlmelville about 7 years ago

uwot - v0.0.0.9006

New features

• Highly experimental mixed data type support for metric: instead of specifying a single metric name (e.g. metric = "euclidean"), you can pass a list, where the name of each item is the metric to use and the value is a vector of the names of the columns to use with that metric, e.g. metric = list("euclidean" = c("A1", "A2"), "cosine" = c("B1", "B2", "B3")) treats columns A1 and A2 as one block, using the Euclidean distance to find nearest neighbors, whereas B1, B2 and B3 are treated as a second block, using the cosine distance.
• Factor columns can also be used in the metric, using the metric name categorical.
• y may now be a data frame or matrix if multiple target data is available.
• New parameter target_metric, to specify the distance metric to use with numerical y. This has the same capabilities as metric.
• Multiple external nearest neighbor data sources are now supported. Instead of passing a list of two matrices, pass a list of lists, one for each external metric.
• More details on mixed data types can be found at https://github.com/jlmelville/uwot#mixed-data-types.
• Compatibility with older versions of RcppParallel (contributed by sirusb).
• scale = "Z" To Z-scale each column of input (synonym for scale = TRUE or scale = "scale").
• New scaling option, scale = "colrange" to scale columns in the range (0, 1).

- R
Published by jlmelville about 7 years ago

uwot - v0.0.0.9005

New features

• Hamming distance is now supported, due to upgrade to RcppAnnoy 0.0.11.

- R
Published by jlmelville over 7 years ago

uwot -

New features

• For supervised UMAP with numeric y, you may pass nearest neighbor data directly, in the same format as that supported by X-related nearest neighbor data. This may be useful if you don't want to use Euclidean distances for the y data, or if you have missing data (and have a way to assign nearest neighbors for those cases, obviously). See the Nearest Neighbor Data Format section for details.

- R
Published by jlmelville over 7 years ago

uwot - v0.0.0.9003

New features

• New parameter ret_nn: when TRUE returns nearest neighbor matrices as a nn list: indices in item idx and distances in item dist. Embedded coordinates are in embedding. Both ret_nn and ret_model can be TRUE, and should not cause any compatibility issues with supervised embeddings.
• nn_method can now take precomputed nearest neighbor data. Must be a list of two matrices: idx, containing integer indexes, and dist containing distances. By no coincidence, this is the format return by ret_nn.

Bug fixes and minor improvements

• Embedding to n_components = 1 was broken (https://github.com/jlmelville/uwot/issues/6)
• User-supplied matrices to init parameter were being modified, in defiance of basic R pass-by-copy semantics.

- R
Published by jlmelville over 7 years ago

uwot - v0.0.0.9002

Better late then never, I will start creating releases, this one back-dated to the middle of August.

• metric = "cosine" is working again for n_threads greater than 0 (https://github.com/jlmelville/uwot/issues/5)

- R
Published by jlmelville over 7 years ago