z3

Welcome to z3

z3 is a ZFS to S3 backup tool. This is basically plumbing around zfs send and zfs receive so you should have at least a basic understanding of what those commands do.

z3 was developed by the awesome engineering team at Presslabs, a Managed WordPress Hosting provider.

For more open-source projects, check Presslabs Code.

Usage

z3 status will show you the current state, what snapshots you have on S3 and on the local zfs dataset.

z3 backup perform full or incremental backups of your dataset.

z3 restore restores your dataset to a certain snapshot.

See zfs SUBCOMMAND --help for more info.

Installing

pip install z3

z3 is tested on python 2.7 with latest boto 2 and boto 2.2.2 (python-boto version on Ubuntu 12.04).

Optional dependencies

```

Install pv to get some progress indication while uploading.

apt-get install pv

Install pigz to provide the pigz compressors.

apt-get install pigz

Install gnupg to provide public-key encryption and compression with gpg.

apt-get install gnupg gnupg-agent ```

Configuring

Most options can be configured as command line flags, environment variables or in a config file, in that order of precedence. The config file is read from /etc/z3_backup/z3.conf if it exists, some defaults are provided by the tool. BUCKET S3_KEY_ID and S3_SECRET can't be provided on the command line. For a list of all options see z3/sample.conf.

You'll usually want z3 to only backup certain snapshots (hourly/daily/weekly). To do that you can specify a SNAPSHOT_PREFIX (defaults to zfs-auto-snap:daily).

Defaults for SNAPSHOT_PREFIX and COMPRESSOR can be set per filesystem like so: ``` [fs:tank/spam] SNAPSHOT_PREFIX=delicious-daily-spam COMPRESSOR=pigz4

[fs:tank/ham] SNAPSHOT_PREFIX=weekly-non-spam ```

Dataset Size, Concurrency and Memory Usage

Since the data is streamed from zfs send it gets read in to memory in chunks. Z3 estimates a good chunk size for you: no smaller than 5MB and large enough to produce at most 9999 chunks. These are S3 limitation for multipart uploads. Here are some example chunk sizes for different datasets: * 50 GiB: 5 MiB * 500 GIB: 53 MiB * 1 TiB: 110 MiB * 2 TiB: 220 MiB

Multiply that by CONCURRENCY to know how much memory your upload will use.

Usage Examples

Status

```

show global options

z3 --help

show status of backups for default dataset

z3 status

show status for other dataset; only snapshots named daily-spam-*

z3 --dataset tank/spam --snapshot-prefix daily-spam- status ```

Backup

```

show backup options

z3 backup --help

perform incremental backup the latest snapshot; use pigz4 compressor

z3 backup --compressor pigz4 --dry-run

inspect the commands that would be executed

z3 backup --compressor pigz4

perform full backup of a specific snapshot

z3 backup --full --snapshot the-part-after-the-at-sign --dry-run

inspect the commands that would be executed

z3 backup --full --snapshot the-part-after-the-at-sign ```

Restore

```

see restore options

z3 restore --help

restore a dataset to a certain snapshot

z3 restore the-part-after-the-at-sign --dry-run

inspect the commands that would be executed

z3 restore the-part-after-the-at-sign

force rollback of filesystem (zfs recv -F)

z3 restore the-part-after-the-at-sign --force ```

Encryption

Encryption of stored objects in S3 is normally provided through AWS Key Management Service (KMS). Alternatively, you can use gnupg for public-key encryption by specifying gpg as a COMPRESSOR and the public key to use as GPG_RECIPIENT. Note: compression and crypto algorithms used by gpg are derived from the public key preferences for GPG_RECIPIENT. Here is a usage example: ```

inspect the key preferences for z3_backup

based on preference order, gpg will use AES256 cipher, and ZLIB compression

gpg --edit-key z3_backup

gpg> showpref ultimate. z3_backup Cipher: AES256, AES192, AES, 3DES Digest: SHA256, SHA384, SHA512, SHA224, SHA1 Compression: ZLIB, BZIP2, ZIP, Uncompressed Features: MDC, Keyserver no-modify

gpg> quit

the following assumes that you have z3_backup in your gnupg public-key ring

perform incremental backup the latest snapshot; use gpg compressor

z3 backup --compressor gpg --gpg-recipient z3_backup --dry-run

after inspectng the commands that would be executed, perform the backup

z3 backup --compressor gpg --gpg-recipient z3_backup

the following assumes that you have z3_backup in your gnupg private-key ring

restore a dataset to a certain snapshot

z3 restore the-part-after-the-at-sign --dry-run

after inspectng the commands that would be executed, perform the restore

z3 restore the-part-after-the-at-sign ```

Other Commands

Other command line tools are provided.

pput reads a stream from standard in and uploads the data to S3.

z3_ssh_sync a convenience tool to allow you to push zfs snapshots to another host. If you need replication you should checkout zrep. This exists because we've already got zrep between 2 nodes and needed a way to push backups to a 3rd machine.

z3_get called by z3 restore to download a backup.

Development Overview

Running the tests

The test suite uses pytest. Some of the tests upload data to S3, so you need to setup the following environment: export S3_KEY_ID="" export S3_SECRET="" export BUCKET="mytestbucket"

To skip tests that use S3: py.test --capture=no --tb=native _tests/ -k "not with_s3"

The Data

Snapshots are obtained using zfs send, optionally piped trough a compressor (pigz by default), and finally piped to pput. Incremental snapshots are always handled individually, so if you have multiple snapshots to send since the last time you've performed a backup they get exported as individual snapshots (multiple calls to zfs send -i dataset@snapA dataset@snapB).

Your snapshots end up as individual keys in an s3 bucket, with a configurable prefix (S3_PREFIX). S3 key metadata is used to identify if a snapshot is full (isfull="true") or incremental. The parent of an incremental snapshot is identified with the parent attribute.

S3 and ZFS snapshots are matched by name.

Health checks

The S3 health checks are very rudimentary, basically if a snapshot is incremental check that the parent exists and is healthy. Full backups are always assumed healthy.

If backup/restore encounter unhealthy snapshots they abort execution.

pput

pput is a simple tool with one job, read data from stdin and upload it to S3. It's usually invoked by z3.

Consistency is important, it's better to fail hard when something goes wrong than silently upload inconsistent or partial data. There are few anticipated errors (if a part fails to upload, retry MAX_RETRY times). Any other problem is unanticipated, so just let the tool crash.

TL;DR Fail early, fail hard.